暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2933 MHz ECC UDIMM 2Rx8 CL21 1.2V 288-Pin Server RAM

SKU CH-EBYK-JDNCN

16 GB DDR4 ECC UDIMM runs at 2933 MHz with CL21 latency for server and workstation upgrades

  • CAS LatencyCL21
  • Rank2Rx8
  • ECC protection guards data integrity with DDR4 2933 MHz speed
  • 16 GB capacity expands server workloads using a single 288-pin module
  • Dual-rank 2Rx8 architecture increases memory density for demanding tasks
  • CL21 latency and 1.2 V operation balance responsiveness with efficiency
  • Rigorous testing and lifetime warranty back dependable server performance

Server DDR4 16 GB module

This 16 GB DDR4 ECC UDIMM runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built for servers and workstations that require error-correcting unbuffered memory. The dual-rank 2Rx8 organisation fits standard 288-pin DIMM slots. Desktop and laptop systems are not supported.

Replaces non-ECC or lower-capacity sticks

Swapping standard unbuffered DIMMs for this ECC module adds data-integrity protection for critical workloads. The jump is worth it when your platform explicitly lists DDR4 2933 MHz ECC UDIMM support and you need 16 GB per slot. Systems limited to registered memory or lower speeds cannot use this module.

Installs in standard 288-pin slots

Align the notch, press evenly until the latches click, then follow the system manual for channel population order. Common issues arise when mixing ranks or speeds across channels, or when the BIOS does not recognise the 2Rx8 configuration. Verify supported memory specifications before installation.

特長

  • ECC protection guards data integrity with DDR4 2933 MHz speed
  • 16 GB capacity expands server workloads using a single 288-pin module
  • Dual-rank 2Rx8 architecture increases memory density for demanding tasks
  • CL21 latency and 1.2 V operation balance responsiveness with efficiency
  • Rigorous testing and lifetime warranty back dependable server performance

仕様

CAS LatencyCL21
Rank2Rx8

この商品に関する質問

Will this 288-pin DDR4 UDIMM fit in my server's standard DIMM slots?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor and 1.2V voltage required by compatible server and workstation motherboards.

What is the correct way to seat this dual-rank ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click, then verify the system recognises the full 16GB and ECC function in BIOS.

When should I expect to replace this 2933 MHz CL21 memory?

DDR4 ECC UDIMMs have no moving parts and typically last the life of the server; replace only if memory diagnostics report correctable or uncorrectable errors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。