暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 SODIMM sticks, no heat spreaders, 260-pin, 32GB kit

A-Tech

A-Tech 32GB (2x16GB) DDR4 2400 ECC SODIMM CL17 1.2V 2Rx8

SKU CH-ENC7-V2VBH

32GB dual-channel DDR4 ECC SODIMM kit with two 16GB modules at 2400 MHz, CL17 latency, 1.2V unbuffered operation for compatible microservers and NAS servers

  • Capacity32GB (2 x 16GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 32GB (2 x 16GB)

Speed DDR4 2400 (PC4 19200)

CAS Latency CL17

  • 32 GB kit expands multitasking headroom for workstations and NAS
  • Dual-channel 2 x 16 GB modules increase memory bandwidth
  • DDR4 2400 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors
  • 2 V JEDEC standard voltage reduces power draw

ECC SODIMM kit for microservers and NAS

This 32 GB kit contains two 16 GB DDR4 2400 SO-DIMM modules built for systems that require ECC unbuffered memory. It targets microservers, mobile workstations and NAS servers needing data-integrity protection. The dual-rank 2Rx8 organisation suits platforms designed for registered-style density without a register. Buyers without ECC-capable DDR4 SO-DIMM slots cannot use this kit.

DDR4 2400 CL17 1.2 V unbuffered ECC

The single specification that decides fit is the combination of DDR4 2400 speed, CL17 latency, 1.2 V JEDEC voltage and unbuffered ECC operation on a 260-pin SO-DIMM. Systems must explicitly support ECC unbuffered SODIMM at this speed and voltage; non-ECC or registered-only platforms will not accept the modules. Verify the motherboard or chassis memory list before purchase.

Standard-voltage thermals and silent operation

With no heat spreader and a 1.2 V rating, the modules run at JEDEC standard power and produce no audible noise in normal use. Passive cooling inside typical microserver or NAS chassis is sufficient for sustained workloads. Power draw remains within the DDR4 2400 unbuffered ECC envelope defined by the 1.2 V specification.

特長

  • 32 GB kit expands multitasking headroom for workstations and NAS
  • Dual-channel 2 x 16 GB modules increase memory bandwidth
  • DDR4 2400 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors
  • 2 V JEDEC standard voltage reduces power draw

仕様

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 16GB 2Rx8 PC4-19200 ECC SODIMM
Part NumberNE-SS-0606
Capacity32GB (2 x 16GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the DDR4 2400 speed affect real-world performance in a laptop or microserver?

The 2400 MHz clock sets the maximum data rate the memory controller can use; actual throughput depends on the platform's memory controller and whether it runs the modules in dual-channel mode.

What does the PC4-19200 designation tell me about the memory interface?

PC4-19200 is the JEDEC standard name for DDR4 2400 SO-DIMMs and confirms the modules follow the 1.2 V DDR4 specification.

Will these 260-pin SO-DIMMs fit my device's memory slots?

They require standard 260-pin DDR4 SO-DIMM sockets; the dual-rank 2Rx8 layout works in systems that support unbuffered ECC SODIMMs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。