A-Tech 16GB (2x8GB) DDR4 2400 ECC SODIMM CL17 1.2V 2Rx8 Kit
- 16GB (2 x 8GB)
- 260-Pin DDR4 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
32GB dual-channel DDR4 ECC SODIMM kit with two 16GB modules at 2400 MHz, CL17 latency, 1.2V unbuffered operation for compatible microservers and NAS servers
Capacity 32GB (2 x 16GB)
Struck-through versions exist but are not stocked here.
Speed DDR4 2400 (PC4 19200)
This 32 GB kit contains two 16 GB DDR4 2400 SO-DIMM modules built for systems that require ECC unbuffered memory. It targets microservers, mobile workstations and NAS servers needing data-integrity protection. The dual-rank 2Rx8 organisation suits platforms designed for registered-style density without a register. Buyers without ECC-capable DDR4 SO-DIMM slots cannot use this kit.
The single specification that decides fit is the combination of DDR4 2400 speed, CL17 latency, 1.2 V JEDEC voltage and unbuffered ECC operation on a 260-pin SO-DIMM. Systems must explicitly support ECC unbuffered SODIMM at this speed and voltage; non-ECC or registered-only platforms will not accept the modules. Verify the motherboard or chassis memory list before purchase.
With no heat spreader and a 1.2 V rating, the modules run at JEDEC standard power and produce no audible noise in normal use. Passive cooling inside typical microserver or NAS chassis is sufficient for sustained workloads. Power draw remains within the DDR4 2400 unbuffered ECC envelope defined by the 1.2 V specification.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 ECC SODIMM |
| Model | A-Tech 16GB 2Rx8 PC4-19200 ECC SODIMM |
| Part Number | NE-SS-0606 |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 2400 MHz clock sets the maximum data rate the memory controller can use; actual throughput depends on the platform's memory controller and whether it runs the modules in dual-channel mode.
PC4-19200 is the JEDEC standard name for DDR4 2400 SO-DIMMs and confirms the modules follow the 1.2 V DDR4 specification.
They require standard 260-pin DDR4 SO-DIMM sockets; the dual-rank 2Rx8 layout works in systems that support unbuffered ECC SODIMMs.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?