暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PCB memory module with black chips and gold edge connectors

A-Tech

A-Tech 32GB DDR4 2666 ECC UDIMM 2Rx8 Samsung M391A4G43MB1-CTD Server Memory

SKU CH-GXNF-4R7FJ

A 32 GB DDR4 2666 ECC UDIMM module with CL19 timing and 1.20 V operation for server workloads

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2666 MHz speed delivers fast data throughput
  • ECC UDIMM detects and corrects memory errors
  • CL19 latency at 1.2 V keeps power draw low
  • 2Rx8 rank on 288-pin DIMM fits standard slots

32GB DDR4 2666 ECC UDIMM Server Memory

This A-Tech module delivers 32GB of DDR4 2666 (PC4-21300) ECC unbuffered memory in a single 288-pin DIMM. It operates at the standard 1.20V with CL19 latency and uses a 2Rx8 rank configuration built with major brand chips. The part is a compatible equivalent for the Samsung M391A4G43MB1-CTD module.

Suited for servers and workstations needing ECC

This module fits systems that accept DDR4 2666 ECC unbuffered DIMMs and have a free 288-pin slot. It is not for platforms that require registered or load-reduced memory, nor for boards limited to non-ECC or lower-density modules. Buyers needing higher speeds, different voltages or registered DIMMs should look elsewhere.

32GB single-module capacity decides fit

The 32GB density on one stick determines whether your board and CPU memory controller support this rank and capacity per slot. Verify the maximum supported density per DIMM and the qualified vendor list for your specific server or workstation model before ordering.

特長

  • 32 GB capacity handles heavy server workloads
  • DDR4 2666 MHz speed delivers fast data throughput
  • ECC UDIMM detects and corrects memory errors
  • CL19 latency at 1.2 V keeps power draw low
  • 2Rx8 rank on 288-pin DIMM fits standard slots

仕様

BrandA-Tech
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will the CL19 latency at 2666 MHz become a bottleneck under sustained server workloads?

The module runs at CL19 with a 2666 MHz data rate, so latency is fixed at that specification for continuous operation.

Does the 1.20 V ECC UDIMM run hot or loud during all-day use?

Standard DDR4 1.20 V voltage keeps power draw low, and the unbuffered design has no active cooling to generate noise.

What motherboard slot and memory controller features are required for this 288-pin 2Rx8 module?

A DDR4 UDIMM slot with ECC support is needed; the 288-pin form factor and 2Rx8 organisation must be accepted by the platform.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。