暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 240-pin server memory module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 2Rx8 Server RAM

SKU CH-CY3M-C3EPZ

4GB DDR3 1333 ECC registered server memory module with 2Rx8 organisation, 1.5V operation and 240-pin DIMM form factor

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity in critical workloads
  • Registered design stabilises signal quality on heavily loaded buses
  • 1333 MHz DDR3 speed matches PC3-10600 system requirements
  • 5 V standard voltage fits existing DDR3 platforms
  • 240-pin DIMM form factor installs directly into server slots

Server Memory Upgrade

This 4 GB DDR3 1333 MHz registered ECC module is built for server and workstation boards that require registered DIMMs. It replaces Samsung M393B5273BH1-CH9, M393B5273CH0-CH9, M393B5273DH0-CH9 and M393B5273EB0-CH9 parts. Buyers needing unbuffered UDIMMs or higher-density kits cannot use this module.

Thermals and Power

The stick runs at the standard DDR3 voltage of 1.5 V with CL9 latency, keeping power draw low inside a 240-pin DIMM slot. Passive cooling is sufficient for normal server workloads because registered buffering reduces electrical load on the memory controller. No active fan or heatsink is required for typical operation.

Compatibility Assurance

Each unit is tested against major-brand chipsets to verify reliable POST and sustained throughput in qualified platforms. The lifetime warranty and US-based technical support provide direct assistance if a compatibility issue arises during installation. Systems that do not support registered ECC memory will not accept this module.

特長

  • ECC protection guards data integrity in critical workloads
  • Registered design stabilises signal quality on heavily loaded buses
  • 1333 MHz DDR3 speed matches PC3-10600 system requirements
  • 5 V standard voltage fits existing DDR3 platforms
  • 240-pin DIMM form factor installs directly into server slots

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

How do I install this 240-pin DDR3 ECC RDIMM, and what step is often missed?

Power off the server, open the chassis, align the notch on the module with the slot key, press firmly until both locking tabs click, then verify in BIOS that the 4GB module is recognised at 1333 MHz with ECC active.

What maintenance or replacement will this registered DIMM need over time?

No scheduled maintenance is required; keep the server's air filters clean so the 1.5 V modules stay cool, and replace the DIMM only if memory diagnostics report correctable or uncorrectable ECC errors.

What limit appears first when this 2Rx8 module runs under sustained load?

The memory controller's maximum supported capacity per channel or total system limit will be reached before the 1333 MHz CL9 rated speed becomes a bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。