暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 240-Pin Desktop RAM Crucial BLS4G3D1339DS1S00

SKU CH-TN7M-NKBWT

4GB DDR3 1333MHz desktop DIMM with CL9 latency and 1.5V operation for AMD and Intel systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR3 1333MHz capacity
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • 240-pin DIMM fits desktop motherboards requiring PC3-10600 modules
  • Tested CL9 latency ensures reliable data access speeds
  • Replaces Crucial CT51264BA1339, CT2KIT51264BA1339, BLS4G3D1339DS1S00 part numbers

A-Tech 4GB DDR3 1333MHz Desktop RAM

This A-Tech module provides 4GB of DDR3 memory for desktop computers. It operates at 1333MHz with a PC3-10600 rating and uses a standard 240-pin DIMM form factor. The kit is designed as a compatible replacement for several Crucial part numbers including CT51264BA1339 and BLS4G3D1339DS1S00.

DDR3 1333MHz PC3-10600 interface limits

The module runs at the standard DDR3 voltage of 1.50V with CL9 latency timings. As an unbuffered non-ECC DIMM, it fits consumer desktop platforms that support this specific speed grade. Systems limited to lower DDR3 frequencies will typically downclock the module automatically to match the memory controller capabilities.

Straightforward 240-pin DIMM installation

Installing this memory involves aligning the notch on the module with the key in the motherboard slot and pressing firmly until the retention clips engage. The most common issue occurs when the notch position is mismatched, which prevents the module from seating fully and can cause the system to fail to boot or recognise the new memory.

特長

  • Boosts system responsiveness with 4GB DDR3 1333MHz capacity
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • 240-pin DIMM fits desktop motherboards requiring PC3-10600 modules
  • Tested CL9 latency ensures reliable data access speeds
  • Replaces Crucial CT51264BA1339, CT2KIT51264BA1339, BLS4G3D1339DS1S00 part numbers

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

この商品に関する質問

Will this DDR3 1333 MHz module fit my desktop motherboard?

The module uses a standard 240-pin DIMM form factor, so it fits any desktop board with DDR3 slots. Check your manual or CPU-Z to confirm the board accepts DDR3 memory.

Can I add this 4 GB stick alongside my existing RAM?

Yes, provided the board supports DDR3 at 1333 MHz and runs at 1.5 V. Mixing speeds is possible but the system will run all modules at the slowest speed.

Is this module compatible with the Crucial part numbers listed?

It is built as a direct replacement for Crucial CT51264BA1339, CT2KIT51264BA1339 and BLS4G3D1339DS1S00, matching the same DDR3 1333 MHz, CL9, 1.5 V specification.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。