我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 240-Pin Desktop RAM Crucial BLS4G3D1339DS1S00

SKU CH-TN7M-NKBWT

4GB DDR3 1333MHz desktop DIMM with CL9 latency and 1.5V operation for AMD and Intel systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR3 1333MHz capacity
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • 240-pin DIMM fits desktop motherboards requiring PC3-10600 modules
  • Tested CL9 latency ensures reliable data access speeds
  • Replaces Crucial CT51264BA1339, CT2KIT51264BA1339, BLS4G3D1339DS1S00 part numbers

A-Tech 4GB DDR3 1333MHz Desktop RAM

This A-Tech module provides 4GB of DDR3 memory for desktop computers. It operates at 1333MHz with a PC3-10600 rating and uses a standard 240-pin DIMM form factor. The kit is designed as a compatible replacement for several Crucial part numbers including CT51264BA1339 and BLS4G3D1339DS1S00.

DDR3 1333MHz PC3-10600 interface limits

The module runs at the standard DDR3 voltage of 1.50V with CL9 latency timings. As an unbuffered non-ECC DIMM, it fits consumer desktop platforms that support this specific speed grade. Systems limited to lower DDR3 frequencies will typically downclock the module automatically to match the memory controller capabilities.

Straightforward 240-pin DIMM installation

Installing this memory involves aligning the notch on the module with the key in the motherboard slot and pressing firmly until the retention clips engage. The most common issue occurs when the notch position is mismatched, which prevents the module from seating fully and can cause the system to fail to boot or recognise the new memory.

商品特色

  • Boosts system responsiveness with 4GB DDR3 1333MHz capacity
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • 240-pin DIMM fits desktop motherboards requiring PC3-10600 modules
  • Tested CL9 latency ensures reliable data access speeds
  • Replaces Crucial CT51264BA1339, CT2KIT51264BA1339, BLS4G3D1339DS1S00 part numbers

商品規格

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

商品問答

Will this DDR3 1333 MHz module fit my desktop motherboard?

The module uses a standard 240-pin DIMM form factor, so it fits any desktop board with DDR3 slots. Check your manual or CPU-Z to confirm the board accepts DDR3 memory.

Can I add this 4 GB stick alongside my existing RAM?

Yes, provided the board supports DDR3 at 1333 MHz and runs at 1.5 V. Mixing speeds is possible but the system will run all modules at the slowest speed.

Is this module compatible with the Crucial part numbers listed?

It is built as a direct replacement for Crucial CT51264BA1339, CT2KIT51264BA1339 and BLS4G3D1339DS1S00, matching the same DDR3 1333 MHz, CL9, 1.5 V specification.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。