暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 DIMM module with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1600MHz ECC UDIMM 1Rx8 Server Memory

SKU CH-G3E7-TJ65X

A 4GB DDR3 1600MHz ECC UDIMM module with CL11 latency and 1.5V operation for server and workstation upgrades

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection safeguards data integrity in server workloads
  • 1600 MHz DDR3 speed delivers responsive performance for demanding tasks
  • Unbuffered 1Rx8 design ensures broad server compatibility
  • 5 V standard voltage matches DDR3 platform requirements
  • 240-pin DIMM form factor fits standard server memory slots

Server DDR3 ECC UDIMM

This 4 GB DDR3 1600 MHz ECC unbuffered DIMM is built for servers and workstations that require error-correcting memory. It runs at 1.5 V with CL11 latency and uses a 1Rx8 Samsung chipset on a 240-pin module.

Compatibility fit

It suits administrators replacing a Samsung M391B5173QH0-CK0 module or adding ECC capacity to a DDR3 platform that accepts unbuffered DIMMs. Builders needing registered memory, higher density modules, or a newer DDR generation should look elsewhere.

Installation notes

The module installs like any standard DDR3 DIMM: align the notch, press until the latches click, and verify the system recognises the full capacity. The most common issue is mixing registered and unbuffered DIMMs, which prevents the server from posting.

特長

  • ECC protection safeguards data integrity in server workloads
  • 1600 MHz DDR3 speed delivers responsive performance for demanding tasks
  • Unbuffered 1Rx8 design ensures broad server compatibility
  • 5 V standard voltage matches DDR3 platform requirements
  • 240-pin DIMM form factor fits standard server memory slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM391B5173QH0-CK0
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetSamsung Chipset
FeaturesM391B5173QH0-CK0

この商品に関する質問

Does this 240-pin DDR3 UDIMM fit a motherboard with DDR3 1.50V slots?

Yes, the module is a 240-pin DDR3 UDIMM rated at 1.50V, matching standard DDR3 DIMM sockets that operate at 1.5V.

Will this CL11 1Rx8 stick run in a server that already has CL9 2Rx4 modules?

The module runs at DDR3 1600 with CL11 timing; the system will typically down-clock all sticks to the slowest common speed and latency.

How can I confirm the 4GB module is detected as ECC UDIMM at 1600 MHz after install?

Check the BIOS memory info or run a tool such as dmidecode or CPU-Z; it should report 4GB, DDR3 1600, ECC unbuffered, 1Rx8.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。