暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 4GB DDR3 1866 ECC RDIMM 240-Pin 1Rx8 Supermicro Certified

SKU CH-EHTD-7T5KF

4 GB DDR3 1866 ECC registered RDIMM, CL13 at 1.5 V, single-rank 1Rx8 on 240 pins, Supermicro certified

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 4 GB DDR3 1866 MHz single-rank module
  • ECC registered design protects data integrity
  • CL13 latency at standard 1.5 V operation
  • 240-pin RDIMM form factor fits DDR3 server slots

Supermicro Certified 4GB DDR3 Module

This 4GB DDR3 1866 ECC registered DIMM carries Supermicro certification for direct replacement in qualified servers and workstations. The module runs at PC3-14900 speed with CL13 latency and standard 1.50V operation.

1Rx8 Registered ECC For Enterprise Platforms

Suits administrators expanding memory in systems that require registered ECC DDR3 on a 240-pin interface. Builders needing unbuffered non-ECC modules, higher capacities per stick, or newer DDR generations should look elsewhere.

Single Rank CL13 At PC3-14900

The 1Rx8 organisation at CL13 determines electrical loading and timing compatibility with the memory controller. Verify the platform's qualified vendor list for this exact speed, rank and voltage before ordering.

特長

  • Supermicro certified for guaranteed server compatibility
  • 4 GB DDR3 1866 MHz single-rank module
  • ECC registered design protects data integrity
  • CL13 latency at standard 1.5 V operation
  • 240-pin RDIMM form factor fits DDR3 server slots

仕様

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-HL04-ER18
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR340L-HL04-ER18 (Hynix)

この商品に関する質問

Does this 240-pin RDIMM fit a standard DDR3 server DIMM slot?

Yes, the module uses the 240-pin RDIMM form factor and 1.5 V DDR3 standard voltage, so it fits any DDR3 registered DIMM slot keyed for that voltage.

What BIOS setting or installation step is commonly missed when adding this registered ECC module?

Enable ECC and registered memory support in the BIOS before booting; many users forget this and the system will not recognise the module.

When should the 4 GB DDR3 1866 CL13 module be replaced in a production server?

Replace it if memory diagnostics report correctable or uncorrectable ECC errors, or when a capacity upgrade requires higher-density DDR3 modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。