暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L server DIMM with silver heat spreader and black chips

A-Tech

A-Tech 4GB DDR3L 1333MHz ECC RDIMM 1Rx4 1.35V Server RAM

SKU CH-K0V3-37BAC

A 4 GB DDR3L ECC registered DIMM running at 1333 MHz with 1.35 V low voltage for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity adds memory headroom for demanding server workloads
  • DDR3L 1333MHz speed delivers reliable data throughput for registered DIMM systems
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 35V low-voltage operation reduces power draw and heat in dense configurations
  • Compatible replacement for Hynix HMT351V7CFR4A-H9 and HMT351V7BFR4A-H9 modules

A-Tech 4GB DDR3L 1333MHz ECC RDIMM

This is a new A-Tech 4GB DDR3L 1333MHz ECC Registered DIMM built as a compatible replacement for Hynix HMT351V7CFR4A-H9 and HMT351V7BFR4A-H9 modules. It operates at 1.35V with CL9 latency and a 1Rx4 rank configuration using major brand chipsets. The 240-pin DDR3 DIMM form factor fits server and workstation boards that accept registered ECC memory.

Suits servers needing low-voltage registered ECC

Systems that require registered ECC DDR3L memory at 1333MHz with a 1.35V operating voltage can use this module to add 4GB per slot. It is not for platforms that only accept unbuffered UDIMMs or modules with a different rank organisation. Buyers whose hardware demands a higher per-module capacity or a different DDR generation must select a different part.

Registered ECC with 1Rx4 organisation

The single specification that decides fit is the registered ECC design combined with a 1Rx4 rank layout on a 240-pin DDR3L interface. Only motherboards qualified for registered ECC DDR3L at this speed and rank will post correctly with this module installed.

特長

  • 4GB capacity adds memory headroom for demanding server workloads
  • DDR3L 1333MHz speed delivers reliable data throughput for registered DIMM systems
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 35V low-voltage operation reduces power draw and heat in dense configurations
  • Compatible replacement for Hynix HMT351V7CFR4A-H9 and HMT351V7BFR4A-H9 modules

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT351V7CFR4A-H9, HMT351V7BFR4A-H9
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesHMT351V7CFR4A-H9, HMT351V7BFR4A-H9

この商品に関する質問

Should I pick the 4GB DDR3L 1333MHz ECC RDIMM or a different capacity for my server?

This listing is a single 4GB module (1Rx4) running at DDR3L 1333MHz with CL9 latency; choose it when your system requires a registered ECC DIMM at 1.35V and you need exactly 4GB per slot.

What does the DDR3L 1333MHz (PC3L-10600) rating mean once the module is installed?

The module operates at 1333MT/s with CL9 timing at 1.35V, delivering registered ECC error correction for stable server workloads within the DDR3L standard.

Does the 240-pin DDR3L RDIMM interface limit the speed or voltage in practice?

The 240-pin DDR3L RDIMM form factor locks operation to 1.35V and the DDR3L 1333MHz (PC3L-10600) data rate; it will not run at higher DDR3 voltages or speeds.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。