暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 4GB DDR3L 1600MHz ECC UDIMM 1Rx8 1.35V Server RAM

SKU CH-A05V-KHFPD

4GB DDR3L ECC UDIMM running at 1600MHz with 1.35V low-voltage operation for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB capacity expands server memory headroom
  • 1600MHz DDR3L speed handles demanding workloads
  • ECC unbuffered design protects data integrity
  • 35V low voltage reduces power draw
  • 240-pin DIMM fits compatible server slots

4GB DDR3L ECC UDIMM for servers

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses an unbuffered ECC design with 1Rx8 organisation on a 240-pin DIMM. The kit targets administrators upgrading Micron-based servers or workstations that require low-voltage error-correcting memory.

Direct replacement for Micron MT9KSF51272AZ parts

The module matches the Micron MT9KSF51272AZ-1G6E1 and MT9KSF51272AZ-1G6P1 part numbers using Micron chipset components. It delivers the same PC3L-12800 specification in a single 4GB stick. No additional accessories or software are bundled with the memory.

Verify DDR3L 1.35V support

Confirm your platform accepts DDR3L 1600MHz unbuffered ECC DIMMs at 1.35V before ordering. Check the maximum supported capacity per slot and total system limit in your server documentation. Systems requiring registered or fully buffered DIMMs cannot use this unbuffered module.

特長

  • 4GB capacity expands server memory headroom
  • 1600MHz DDR3L speed handles demanding workloads
  • ECC unbuffered design protects data integrity
  • 35V low voltage reduces power draw
  • 240-pin DIMM fits compatible server slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT9KSF51272AZ-1G6E1, MT9KSF51272AZ-1G6P1
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMT9KSF51272AZ-1G6E1, MT9KSF51272AZ-1G6P1

この商品に関する質問

Will the 1Rx8 ECC chips on this DDR3L module need replacement under normal server workloads?

The module uses Micron chipset components tested to A-Tech quality standards; ECC corrects single-bit errors in real time, so the chips themselves do not wear out and require no scheduled replacement.

What thermal limit appears first when this 1.35 V DDR3L UDIMM runs continuously at 1600 MHz?

The JEDEC-rated 1.35 V low-voltage operation keeps power draw low, so the module stays within its specified thermal envelope before any throttling or error-correction overhead becomes a bottleneck.

How much fan noise or extra heat does this 240-pin DDR3L ECC stick add when the server runs all day?

At 1.35 V the stick draws minimal power, adding negligible heat to the chassis; standard server airflow handles it without requiring higher fan speeds or audible noise increase.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。