EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
4 GB DDR4 2400 ECC unbuffered UDIMM with CL17 latency and 1.2 V operation
This A-Tech module delivers 4GB of DDR4 2400 ECC unbuffered memory for server and workstation systems. It operates at CL17 latency with standard 1.20V voltage and uses a 1Rx8 rank configuration on a 288-pin DIMM. The module serves as a compatible replacement for the Kingston KVR24E17S8/4 part number.
This memory fits motherboards that accept unbuffered ECC UDIMM modules. It will not work in platforms requiring registered or load-reduced DIMMs. Buyers needing larger single-module capacities or higher frequency ratings should verify their board specifications before purchasing.
The module runs at DDR4 2400 (PC4-19200) with CL17 timing. Your system must support this exact speed grade and unbuffered ECC operation for the RAM to function correctly.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KVR24E17S8/4 |
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | KVR24E17S8/4 |
Yes, the module uses the standard 288-pin DDR4 UDIMM form factor and will install in any compatible DDR4 DIMM slot.
Mixing ECC and non-ECC memory is not recommended; the system will typically disable ECC and may default to the lowest common speed or fail to boot.
Enter the BIOS/UEFI or use a tool like CPU-Z on Linux/Windows — verify the speed reads 2400 MT/s, CL17 timings, and ECC status shows enabled.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?