暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors, standard 288-pin DIMM form factor

A-Tech

A-Tech 4GB DDR4 2400MHz CL17 1.2V 288-Pin Desktop RAM

SKU CH-WBPY-E8MCY

4GB DDR4 2400MHz CL17 1.2V 288-pin desktop memory module for system upgrades

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 4GB capacity lets you run more programs at once
  • 2400MHz DDR4 speed accelerates data transfer for responsive multitasking
  • CL17 latency keeps timing tight for smooth operation
  • 2V standard voltage reduces power draw and heat
  • 288-pin DIMM fits compatible desktop motherboards

4GB DDR4 2400MHz Desktop Module

This single 4GB DDR4 module runs at 2400MHz with CL17 latency and 1.2V operation. It uses a 288-pin unbuffered DIMM form factor built with major brand chips. The kit is designed as a direct replacement for Dell part numbers A9321910 and SNPGTWW1C/4G. It targets desktop users who need a straightforward capacity increase for everyday workloads.

Thermals and Power in Daily Use

Standard 1.2V DDR4 voltage keeps power draw low during typical desktop tasks. The unbuffered design adds no extra electrical load beyond the memory chips themselves. No active cooling is required and the module runs silently inside a normal case airflow path. Heat output stays within normal DDR4 limits for a 4GB stick at this frequency.

What the Bundle Changes

The package contains only the memory module itself with no extra cables, brackets or software utilities. Installation is a simple DIMM slot insertion followed by an automatic BIOS detection at 2400MHz. No driver downloads or configuration tools are needed to enable the rated speed. The lifetime warranty and US-based technical support cover the module after installation.

特長

  • 4GB capacity lets you run more programs at once
  • 2400MHz DDR4 speed accelerates data transfer for responsive multitasking
  • CL17 latency keeps timing tight for smooth operation
  • 2V standard voltage reduces power draw and heat
  • 288-pin DIMM fits compatible desktop motherboards

仕様

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

この商品に関する質問

Will this 4GB DDR4 module fit my Dell desktop that uses part number A9321910?

Yes, this module is a direct replacement for Dell part numbers A9321910 and SNPGTWW1C/4G and uses the standard 288-pin DIMM form factor.

My motherboard only supports 1.2V DDR4 memory; is this module compatible?

This module operates at the standard DDR4 voltage of 1.20V, matching the requirement for 1.2V DDR4 motherboards.

Does this RAM require any special BIOS settings or XMP profiles to run at 2400MHz?

The module is rated at 2400MHz with a CAS latency of 17 and runs at standard JEDEC timings without needing XMP or manual BIOS changes.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。