BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
4GB DDR4 2400MHz CL17 desktop DIMM with 1Rx8 layout and 1.2V operation
This single 4GB DDR4 DIMM runs at 2400MHz with CL17 latency and 1.20V operation. It is an unbuffered, non-ECC module built with major-brand chips for AMD and Intel desktop platforms.
Verify that your board accepts 288-pin DDR4 DIMMs and supports 2400MHz PC4-19200 memory. Confirm the system can use a 1Rx8 density module and that total capacity stays within the board's limit.
The module maintains its rated 2400MHz frequency at the standard 1.20V without requiring extra voltage headroom. Unbuffered operation keeps latency predictable during extended workloads, while major-brand chips provide consistent signal integrity over long sessions.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
The box contains one 4GB DDR4 2400MHz CL17 288-pin DIMM module. No extra parts or tools are required; it fits directly into a standard desktop DDR4 slot.
This single 4GB stick suits a basic upgrade or a system with only one free slot. If your board supports dual-channel, adding a second identical 4GB module will double bandwidth.
The module operates at 2400MT/s with CL17 timing at 1.20V. The memory controller will set this speed automatically if the BIOS supports DDR4 2400, otherwise it will run at the highest speed both the CPU and motherboard allow.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?