BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
4GB DDR4 2400MHz CL17 desktop DIMM with 1Rx8 layout and 1.2V operation
This single 4GB DDR4 DIMM runs at 2400MHz with CL17 latency and 1.20V operation. It is an unbuffered, non-ECC module built with major-brand chips for AMD and Intel desktop platforms.
Verify that your board accepts 288-pin DDR4 DIMMs and supports 2400MHz PC4-19200 memory. Confirm the system can use a 1Rx8 density module and that total capacity stays within the board's limit.
The module maintains its rated 2400MHz frequency at the standard 1.20V without requiring extra voltage headroom. Unbuffered operation keeps latency predictable during extended workloads, while major-brand chips provide consistent signal integrity over long sessions.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
The box contains one 4GB DDR4 2400MHz CL17 288-pin DIMM module. No extra parts or tools are required; it fits directly into a standard desktop DDR4 slot.
This single 4GB stick suits a basic upgrade or a system with only one free slot. If your board supports dual-channel, adding a second identical 4GB module will double bandwidth.
The module operates at 2400MT/s with CL17 timing at 1.20V. The memory controller will set this speed automatically if the BIOS supports DDR4 2400, otherwise it will run at the highest speed both the CPU and motherboard allow.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?