BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
4GB DDR4 2400MHz CL17 desktop DIMM, 288-pin unbuffered non-ECC at 1.2V, tested for AMD and Intel systems
This 4GB DDR4 module runs at 2400MHz with CL17 latency and 1.20V operation. It uses a standard 288-pin unbuffered DIMM form factor and non-ECC major-brand chips. The stick is built as a direct replacement for Crucial BLS4G4D240FSE and BLS4K4G4D240FSE part numbers.
It fits owners of AMD and Intel desktop boards that accept DDR4 2400MHz UDIMMs and need a single 4GB module to fill a free slot or replace a failed stick. Builders planning dual-channel kits, higher frequencies, ECC support or larger capacities per slot should choose a different product.
The tested frequency is 2400MHz (PC4-19200) with a CAS latency of 17. If the motherboard or existing memory requires a different speed grade or lower latency, this module will not match the required specification.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
It is a standard DDR4 DIMM operating at 1.20 V with CL17 timings; the system will clock all installed modules to the lowest common speed and latency.
Check the memory frequency in your BIOS or a system information tool; it should report 2400 MT/s (PC4-19200) for this stick.
The box contains the single 4 GB 288-pin DDR4 UDIMM; no cables, brackets or additional components are required for installation.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?