暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 288-pin server DIMM module with black chips and gold contacts

A-Tech

A-Tech 64GB DDR4 2133 ECC LRDIMM 4Rx4 server RAM

SKU CH-K8XP-51CK4

64 GB DDR4 2133 ECC LRDIMM module with 4Rx4 organisation and 1.2 V operation for HP 839051-001 servers

  • Capacity64GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64 GB capacity lets servers handle larger workloads
  • DDR4 2133 MHz speed supports fast data throughput
  • ECC LRDIMM design reduces electrical load for stability
  • CL15 latency with 1.20 V voltage balances performance and efficiency
  • 288-pin DIMM form factor fits compatible DDR4 server slots

64GB DDR4 2133 ECC LRDIMM

This 64GB DDR4 2133 ECC LRDIMM module targets server and workstation operators who need maximum capacity per slot. The 4Rx4 load-reduced design allows dense memory configurations on platforms that support LRDIMM architecture. It replaces HP part 839051-001 for compatible systems.

Upgrade path from lower-capacity RDIMMs

The jump is worthwhile when your workload exceeds the rank or capacity limits of standard registered DIMMs and your motherboard qualifies LRDIMM at 2133 MT/s. If the platform only accepts RDIMM or caps speed below 2133, this module will not provide the expected benefit.

288-pin DIMM installation

Installation follows standard DIMM alignment; the 288-pin keying prevents incorrect insertion. The common issue is mixing LRDIMM with RDIMM in the same channel or populating slots in an order the firmware does not support, which leads to a no-post condition.

特長

  • 64 GB capacity lets servers handle larger workloads
  • DDR4 2133 MHz speed supports fast data throughput
  • ECC LRDIMM design reduces electrical load for stability
  • CL15 latency with 1.20 V voltage balances performance and efficiency
  • 288-pin DIMM form factor fits compatible DDR4 server slots

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
Model839051-001
Capacity64GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
Features839051-001

この商品に関する質問

Will the 288-pin DIMM fit my server's memory slots?

This module uses the standard DDR4 288-pin DIMM form factor. Verify your system accepts DDR4 LRDIMMs before purchase.

Do I need to configure anything in BIOS after installing this 4Rx4 LRDIMM?

Install the module with the system powered off. Most servers detect DDR4 2133 ECC LRDIMM automatically; check the memory configuration screen to confirm 64 GB at 2133 MHz.

When should this 64 GB ECC module be replaced?

Replace the module if the system logs uncorrectable ECC errors, corrected-error thresholds are exceeded, or the DIMM fails to initialise during POST.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。