暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR5 RDIMM module with black chips and silver heat spreader

A-Tech

A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 HP N20162-001 P43333-1A1 P50312-B21 P56153-001 Server Memory

SKU CH-45E0-ST5S4

A 64GB DDR5 4800 ECC RDIMM module with CL40 latency and 1.1V operation for HP server upgrades

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64 GB capacity handles large server workloads
  • DDR5 4800 speed moves data at PC5-38400 rates
  • ECC RDIMM design detects and corrects memory errors
  • 1 V operation matches DDR5 standard voltage
  • 2Rx4 rank layout fits HP N20162-001 P43333-1A1 P50312-B21 P56153-001 systems

64GB DDR5 4800 ECC RDIMM Server Memory

This 64GB DDR5 4800 module is a registered ECC DIMM built for server and workstation platforms that require error-correcting memory. It operates at 1.10V with a CAS latency of 40 and uses a 2Rx4 organisation. The part replaces HP part numbers N20162-001, P43333-1A1, P50312-B21 and P56153-001.

Replaces HP DDR5 4800 Registered ECC Modules

The module is a direct equivalent for the listed HP part numbers and upgrades systems currently running lower-capacity or slower DDR5 registered ECC memory. The jump is worthwhile when the platform supports DDR5 4800 speeds and needs the 64GB density per DIMM to reach higher total memory configurations.

Check DDR5 RDIMM Slot Count and Maximum Capacity

Verify that your motherboard or server chassis accepts 288-pin DDR5 RDIMMs and that the memory controller supports 64GB single-rank-equivalent 2Rx4 modules at 4800 MT/s. Confirm the maximum supported memory per slot and the total population limit before ordering.

特長

  • 64 GB capacity handles large server workloads
  • DDR5 4800 speed moves data at PC5-38400 rates
  • ECC RDIMM design detects and corrects memory errors
  • 1 V operation matches DDR5 standard voltage
  • 2Rx4 rank layout fits HP N20162-001 P43333-1A1 P50312-B21 P56153-001 systems

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
ModelN20162-001, P43333-1A1, P50312-B21, P56153-001
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4 (EC8)
ChipsetMajor Brand Chipset
FeaturesN20162-001, P43333-1A1, P50312-B21, P56153-001

この商品に関する質問

Will this 288-pin DDR5 RDIMM fit my server's memory slots?

This module uses the standard 288-pin DDR5 DIMM form factor. It requires a server or workstation motherboard with DDR5 RDIMM slots that support 1.10V operation and registered memory.

What is the correct way to install this 64GB ECC module?

Power down the server and disconnect the power cord. Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click shut. A common error is not fully seating the module so the clips do not engage.

When should I consider replacing this 64GB DDR5 4800 module?

Replace the module if memory diagnostics report uncorrectable ECC errors, if the system fails to POST with the module installed, or if a capacity upgrade is needed beyond the current 64GB configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。