We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR5 RDIMM module with black chips and silver heat spreader

A-Tech

A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 HP N20162-001 P43333-1A1 P50312-B21 P56153-001 Server Memory

SKU CH-45E0-ST5S4

A 64GB DDR5 4800 ECC RDIMM module with CL40 latency and 1.1V operation for HP server upgrades

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64 GB capacity handles large server workloads
  • DDR5 4800 speed moves data at PC5-38400 rates
  • ECC RDIMM design detects and corrects memory errors
  • 1 V operation matches DDR5 standard voltage
  • 2Rx4 rank layout fits HP N20162-001 P43333-1A1 P50312-B21 P56153-001 systems

64GB DDR5 4800 ECC RDIMM Server Memory

This 64GB DDR5 4800 module is a registered ECC DIMM built for server and workstation platforms that require error-correcting memory. It operates at 1.10V with a CAS latency of 40 and uses a 2Rx4 organisation. The part replaces HP part numbers N20162-001, P43333-1A1, P50312-B21 and P56153-001.

Replaces HP DDR5 4800 Registered ECC Modules

The module is a direct equivalent for the listed HP part numbers and upgrades systems currently running lower-capacity or slower DDR5 registered ECC memory. The jump is worthwhile when the platform supports DDR5 4800 speeds and needs the 64GB density per DIMM to reach higher total memory configurations.

Check DDR5 RDIMM Slot Count and Maximum Capacity

Verify that your motherboard or server chassis accepts 288-pin DDR5 RDIMMs and that the memory controller supports 64GB single-rank-equivalent 2Rx4 modules at 4800 MT/s. Confirm the maximum supported memory per slot and the total population limit before ordering.

Highlights

  • 64 GB capacity handles large server workloads
  • DDR5 4800 speed moves data at PC5-38400 rates
  • ECC RDIMM design detects and corrects memory errors
  • 1 V operation matches DDR5 standard voltage
  • 2Rx4 rank layout fits HP N20162-001 P43333-1A1 P50312-B21 P56153-001 systems

Specifications

BrandA-Tech
SeriesCompatible Replacement for HP
ModelN20162-001, P43333-1A1, P50312-B21, P56153-001
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4 (EC8)
ChipsetMajor Brand Chipset
FeaturesN20162-001, P43333-1A1, P50312-B21, P56153-001

Questions about this item

Will this 288-pin DDR5 RDIMM fit my server's memory slots?

This module uses the standard 288-pin DDR5 DIMM form factor. It requires a server or workstation motherboard with DDR5 RDIMM slots that support 1.10V operation and registered memory.

What is the correct way to install this 64GB ECC module?

Power down the server and disconnect the power cord. Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click shut. A common error is not fully seating the module so the clips do not engage.

When should I consider replacing this 64GB DDR5 4800 module?

Replace the module if memory diagnostics report uncorrectable ECC errors, if the system fails to POST with the module installed, or if a capacity upgrade is needed beyond the current 64GB configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.