A-Tech
A-Tech 8GB (2x4GB) DDR3 1066MHz PC3-8500 CL7 1.5V 240-Pin Desktop RAM
Dual-channel 8 GB DDR3 kit running at 1066 MHz with CL7 timing and 1.5 V for compatible desktop systems
- Capacity8GB (2 x 4GB)
- Type240-Pin PC RAM
- SpeedDDR3 1066 (PC3 8500)
- Tested Frequency1066
- Tested Timing7
- Voltage1.50V
Capacity 8GB (2 x 4GB)
- 2GB
- 4GB
- 4GB (2 x 2GB)
- 8GB
- 8GB (2 x 4GB)
- 8GB (4 x 2GB)
- 16GB (2 x 8GB)
- 16GB (4 x 4GB)
- 32GB (4 x 8GB)
Speed DDR3 1066 (PC3 8500)
- 8GB dual-channel kit expands multitasking headroom for everyday workloads
- DDR3 1066 MHz speed matches PC3-8500 system requirements
- CL7 latency and 1.5V operation keep timing tight and power draw low
- 240-pin unbuffered DIMM fits standard desktop motherboards without ECC
- Tested with major-brand chips for reliable compatibility across AMD and Intel platforms
DDR3 8GB dual-channel kit
This kit delivers eight gigabytes of DDR3 memory across two unbuffered 4GB modules. It is intended for desktop systems that accept 240-pin DIMMs running at the PC3-8500 standard. The 1.5V operating voltage matches the baseline specification for DDR3 desktop memory.
PC3-8500 speed ceiling
The modules are tested at 1066MHz with a CAS latency of 7, which defines the practical throughput limit of the DDR3 1066 interface. Systems that only support lower DDR3 speeds will downclock the kit automatically, while boards rated for higher DDR3 frequencies cannot push these modules past their validated 1066MHz rating.
8GB capacity boundary
Eight gigabytes provides comfortable headroom for everyday multitasking, office suites and light content creation on DDR3-era platforms. Workloads that regularly exceed 8GB — such as large virtual-machine sets, heavy video timelines or modern AAA titles — will encounter paging and require a platform upgrade rather than a simple module swap.
特長
- 8GB dual-channel kit expands multitasking headroom for everyday workloads
- DDR3 1066 MHz speed matches PC3-8500 system requirements
- CL7 latency and 1.5V operation keep timing tight and power draw low
- 240-pin unbuffered DIMM fits standard desktop motherboards without ECC
- Tested with major-brand chips for reliable compatibility across AMD and Intel platforms
仕様
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Desktop Memory RAM |
| Model | A-Tech 8GB Kit (2x4GB) PC3-8500 Desktop RAM |
| Part Number | NE-SS-0652 |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin PC RAM |
| Speed | DDR3 1066 (PC3 8500) |
| Tested Frequency | 1066 |
| Tested Timing | 7 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
このモデルの他のバージョン
同シリーズにさらに 5点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
A-Tech 8GB (2x4GB) DDR3 1600MHz CL11 240-Pin Desktop RAM
- 8GB (2 x 4GB)
- DDR3 1600 (PC3 1280…
A-Tech 8GB (2x4GB) DDR3 1333MHz PC3-10600 CL9 240-Pin Desktop RAM
- 8GB (2 x 4GB)
- DDR3 1333 (PC3 1060…
A-Tech 8GB (2x4GB) DDR3L 1866MHz CL13 1.35V 240-Pin Desktop RAM
- 8GB (2 x 4GB)
- 240-Pin PC RAM
A-Tech 16GB (4x4GB) DDR3 1600MHz CL11 240-Pin Desktop RAM
- 16GB (4 x 4GB)
- 240-Pin PC RAM
この商品に関する質問
Will this kit work in my desktop that currently uses DDR3 memory?
Yes, the kit is DDR3 DIMM memory designed for desktop computers that support DDR3 1066 MHz modules.
Do I need to change any BIOS settings to run the memory at the rated speed?
The modules are tested at 1066 MHz with CL7 timing at 1.5 V; most boards will apply these settings automatically on boot.
My motherboard has four memory slots — can I install this 2 x 4 GB kit alongside my existing 2 x 2 GB sticks?
You can, provided the board supports mixed capacities and the total does not exceed its maximum; all modules will run at the slowest common speed.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)








