We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks with black chips, no heat spreaders, 240-pin

A-Tech

A-Tech 8GB (2x4GB) DDR3 1066MHz PC3-8500 CL7 1.5V 240-Pin Desktop RAM

SKU CH-GRCC-H3BVK

Dual-channel 8 GB DDR3 kit running at 1066 MHz with CL7 timing and 1.5 V for compatible desktop systems

  • Capacity8GB (2 x 4GB)
  • Type240-Pin PC RAM
  • SpeedDDR3 1066 (PC3 8500)
  • Tested Frequency1066
  • Tested Timing7
  • Voltage1.50V

Capacity 8GB (2 x 4GB)

Speed DDR3 1066 (PC3 8500)

  • 8GB dual-channel kit expands multitasking headroom for everyday workloads
  • DDR3 1066 MHz speed matches PC3-8500 system requirements
  • CL7 latency and 1.5V operation keep timing tight and power draw low
  • 240-pin unbuffered DIMM fits standard desktop motherboards without ECC
  • Tested with major-brand chips for reliable compatibility across AMD and Intel platforms

DDR3 8GB dual-channel kit

This kit delivers eight gigabytes of DDR3 memory across two unbuffered 4GB modules. It is intended for desktop systems that accept 240-pin DIMMs running at the PC3-8500 standard. The 1.5V operating voltage matches the baseline specification for DDR3 desktop memory.

PC3-8500 speed ceiling

The modules are tested at 1066MHz with a CAS latency of 7, which defines the practical throughput limit of the DDR3 1066 interface. Systems that only support lower DDR3 speeds will downclock the kit automatically, while boards rated for higher DDR3 frequencies cannot push these modules past their validated 1066MHz rating.

8GB capacity boundary

Eight gigabytes provides comfortable headroom for everyday multitasking, office suites and light content creation on DDR3-era platforms. Workloads that regularly exceed 8GB — such as large virtual-machine sets, heavy video timelines or modern AAA titles — will encounter paging and require a platform upgrade rather than a simple module swap.

Highlights

  • 8GB dual-channel kit expands multitasking headroom for everyday workloads
  • DDR3 1066 MHz speed matches PC3-8500 system requirements
  • CL7 latency and 1.5V operation keep timing tight and power draw low
  • 240-pin unbuffered DIMM fits standard desktop motherboards without ECC
  • Tested with major-brand chips for reliable compatibility across AMD and Intel platforms

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Desktop Memory RAM
ModelA-Tech 8GB Kit (2x4GB) PC3-8500 Desktop RAM
Part NumberNE-SS-0652
Capacity8GB (2 x 4GB)
Type240-Pin PC RAM
SpeedDDR3 1066 (PC3 8500)
Tested Frequency1066
Tested Timing7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this kit work in my desktop that currently uses DDR3 memory?

Yes, the kit is DDR3 DIMM memory designed for desktop computers that support DDR3 1066 MHz modules.

Do I need to change any BIOS settings to run the memory at the rated speed?

The modules are tested at 1066 MHz with CL7 timing at 1.5 V; most boards will apply these settings automatically on boot.

My motherboard has four memory slots — can I install this 2 x 4 GB kit alongside my existing 2 x 2 GB sticks?

You can, provided the board supports mixed capacities and the total does not exceed its maximum; all modules will run at the slowest common speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.