EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8 GB DDR3 1066 MHz ECC registered server memory module with 2Rx4 organisation, CL3 latency and 1.5 V operation
This A-Tech module provides 8 GB of DDR3-1066 registered ECC memory on a 240-pin DIMM. It runs at the standard 1.50 V and uses a 2Rx4 organisation with Samsung chips. The CL3 latency and PC3-8500 rating suit enterprise workloads that demand data integrity.
The stick fits servers and workstations that require registered ECC DDR3 DIMMs. Builders whose motherboards accept only unbuffered non-ECC memory or a later DDR generation cannot use this module. Verify the platform documentation before buying.
The registered ECC 2Rx4 DDR3-1066 specification is the single detail that determines compatibility. Only systems designed for this exact memory type will recognise and operate the module correctly.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M393B1K70CHD-CF8 |
| Capacity | 8GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL3 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Samsung Chipset |
| Features | M393B1K70CHD-CF8 |
Yes, the module uses the standard 240-pin DDR3 DIMM form factor required by servers supporting DDR3 1066 registered ECC memory.
Align the notch with the slot key, press firmly until both locking tabs click, and ensure the server BIOS recognises the ECC registered configuration at 1.5V.
DDR3 registered ECC modules typically run for the server's service life; replace only if memory diagnostics report correctable errors or the system fails POST.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?