暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR3 1066 ECC RDIMM 2Rx4 server RAM

SKU CH-F68S-R54WV

An 8 GB DDR3 1066 ECC registered DIMM with 2Rx4 organisation and CL7 latency for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3 design
  • 1066 MHz speed handles server workloads at PC3-8500 bandwidth
  • 8 GB capacity in a single 240-pin module fits Dell part numbers
  • 2Rx4 rank organisation uses major-brand chips for reliable operation
  • 5 V standard voltage matches DDR3 platform requirements

8GB DDR3 1066 ECC Registered DIMM

This 8GB DDR3 module runs at 1066 MHz (PC3-8500) with CL7 latency and 1.5 V operation. It uses a registered 2Rx4 layout and major-brand chips to provide error-correcting memory for compatible Dell servers and workstations. The 240-pin form factor matches standard DDR3 DIMM slots in those platforms.

Suited for Dell servers needing registered ECC DDR3

Buyers replacing or expanding memory in systems that accept the listed Dell part numbers will find this module a direct fit. It is not suitable for platforms that require unbuffered UDIMMs, load-reduced DIMMs, or a different DDR generation, so verify the motherboard specification before ordering.

Registered ECC 2Rx4 organisation decides fit

The module is built as a dual-rank 2Rx4 registered ECC DIMM, a configuration that many server chipsets require for stability at higher capacities. If the target system calls for single-rank, non-ECC, or unregistered memory, this part will not work.

特長

  • ECC protection prevents data errors with registered DDR3 design
  • 1066 MHz speed handles server workloads at PC3-8500 bandwidth
  • 8 GB capacity in a single 240-pin module fits Dell part numbers
  • 2Rx4 rank organisation uses major-brand chips for reliable operation
  • 5 V standard voltage matches DDR3 platform requirements

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does the PC3-8500 rating limit real-world throughput on a registered DDR3 channel?

The PC3-8500 label indicates a 1066 MT/s data rate; actual throughput depends on the server's memory controller and channel configuration.

What physical slot and pin count does this 240-pin DDR3 RDIMM require?

It fits a standard 240-pin DDR3 DIMM socket keyed for registered modules; the notch position matches the DDR3 registered specification.

What is the correct installation sequence for this ECC RDIMM in a multi-socket server?

Populate the slot assigned to the target CPU channel first, align the notch, press straight down until both latches click, then verify the module is seated evenly before powering on.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。