暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PCB memory module with black chips and silver edge connectors

A-Tech

A-Tech 8GB DDR3 1333 ECC RDIMM 4Rx8 Server RAM

SKU CH-8X09-X4Y9K

8GB DDR3 1333MHz ECC registered server memory module with 4Rx8 organisation and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC error correction protects data integrity in servers
  • Registered 4Rx8 design supports high-density 8 GB module
  • DDR3 1333 MHz CL9 speed matches PC3-10600 spec
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Tested replacement for Kingston KVR1333D3LQ8R9S/8GEC and KVR1333D3Q8R9S/8G

8GB DDR3 1333 ECC RDIMM

This 8GB registered DIMM runs at 1333 MHz with CL9 timing and 1.5 V standard voltage. It uses a 4Rx8 organisation and carries ECC for data integrity in server and workstation platforms. The module fits 240-pin DDR3 slots and is built as a compatible replacement for Kingston KVR1333D3LQ8R9S/8GEC and KVR1333D3Q8R9S/8G.

Thermals and power

Standard 1.5 V DDR3 voltage keeps power draw modest under typical server loads. Registered buffering reduces electrical load on the memory controller, helping maintain stable operation in multi-DIMM configurations. No active cooling is required beyond normal chassis airflow.

Upgrade context

This module replaces a failed or missing Kingston 8GB DDR3 1333 ECC RDIMM in qualified systems. The jump is worthwhile when expanding capacity on a platform that supports 4Rx8 registered memory and needs ECC protection for critical workloads. Buyers who need higher speeds, lower voltages, or unbuffered DIMMs should verify their platform specifications before ordering.

特長

  • ECC error correction protects data integrity in servers
  • Registered 4Rx8 design supports high-density 8 GB module
  • DDR3 1333 MHz CL9 speed matches PC3-10600 spec
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Tested replacement for Kingston KVR1333D3LQ8R9S/8GEC and KVR1333D3Q8R9S/8G

仕様

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR1333D3LQ8R9S/8GEC, KVR1333D3Q8R9S/8G
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesKVR1333D3LQ8R9S/8GEC, KVR1333D3Q8R9S/8G

この商品に関する質問

How do I install the 240-pin DDR3 RDIMM and what step is often missed?

Align the notch on the module with the key in the 240-pin slot, press firmly until both side clips click, then verify in BIOS that the 1.50V ECC registered module is recognised at 1333 MHz.

What maintenance or replacement will this 8GB 4Rx8 module need later?

No routine maintenance is required; replace the module only if memory diagnostics report uncorrectable ECC errors or the system fails to POST with it installed.

What limit appears first under sustained load with this CL9 1.5V registered DIMM?

The 1333 MHz DDR3 bus bandwidth and CL9 latency ceiling are reached before the 1.5V thermal envelope becomes a bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。