暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L registered DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 1Rx4 CL11 1.35V Server RAM

SKU CH-F44V-4E00W

8GB DDR3L 1600MHz ECC registered server DIMM, 1Rx4 CL11 1.35V, HP compatible

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity in server workloads
  • Registered buffering stabilises signal quality on 240-pin DDR3L modules
  • Low 1.35V DDR3L voltage reduces power draw versus standard DDR3
  • 1Rx4 single-rank layout simplifies memory controller scheduling
  • Compatible replacement for HP part numbers 676333-B21, 731656-381, 731765-B21, 731765-B211, 731765-S21, 735302-001

8GB DDR3L ECC RDIMM for Servers

This 8GB registered DIMM runs at DDR3L 1600 with CL11 latency and a 1.35V low-voltage profile. It uses major-brand chips in a 1Rx4 organisation to deliver error-correcting memory for server and workstation platforms that require registered modules.

Verify registered ECC support and DDR3L voltage

Confirm that your motherboard accepts registered ECC DIMMs and operates at 1.35V before ordering. Standard unbuffered or non-ECC boards will not post with this module, and 1.5V-only slots may not support the lower voltage.

Single 240-pin module frees remaining slots

The 1Rx4 layout places the full 8GB on one 240-pin stick, leaving additional DIMM sockets open for future capacity expansion. It slots directly into compatible HP part-numbered systems without adapters or configuration changes.

特長

  • ECC protection guards data integrity in server workloads
  • Registered buffering stabilises signal quality on 240-pin DDR3L modules
  • Low 1.35V DDR3L voltage reduces power draw versus standard DDR3
  • 1Rx4 single-rank layout simplifies memory controller scheduling
  • Compatible replacement for HP part numbers 676333-B21, 731656-381, 731765-B21, 731765-B211, 731765-S21, 735302-001

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What comes in the box and do I need anything else to install this module?

The box contains one 8 GB DDR3L 1600 ECC RDIMM module. No extra parts are required; the 240-pin DIMM installs directly into a compatible server motherboard slot.

How do I choose between the listed HP part numbers for my system?

Match the HP part number on your existing module or in your server manual — 676333-B21, 731656-381, 731765-B21, 731765-B211, 731765-S21 or 735302-001 — to confirm this module is the correct replacement.

What does the 1600 MHz rating mean once the module is running in my server?

The module operates at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35 V, delivering registered ECC bandwidth for stable server workloads.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。