暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR4-2133 ECC RDIMM 1Rx4 CL15 1.2V Server Memory

SKU CH-W161-G6Z0W

8GB DDR4-2133 ECC registered DIMM with CL15 timing for HP server upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 architecture
  • 2133 MHz speed and CL15 latency deliver responsive server performance
  • 2 V operation matches DDR4 standard voltage for efficient power use
  • 8 GB capacity in a single 288-pin RDIMM module simplifies upgrades
  • Tested compatibility with HP part numbers including 726718, 752368, 774170, 780672, 784671, 790109, 803028, 807816

8GB DDR4-2133 ECC Registered DIMM

This 8GB DDR4-2133 module is built for servers and workstations that require error-correcting registered memory. It operates at the standard 1.2V voltage and uses a 1Rx4 organisation with CL15 latency. The 288-pin form factor fits DDR4 DIMM slots in compatible enterprise platforms.

Registered ECC with 1Rx4 organisation

The single specification that decides fit is the registered ECC design combined with a 1Rx4 rank structure. Systems that expect unbuffered non-ECC UDIMMs or a different rank configuration will not accept this module. Verify the platform memory specification before ordering.

Straightforward DIMM installation

Installation follows the usual DIMM procedure: align the notch, press firmly until the retention clips engage, and confirm the module seats evenly. The most common issue is mixing registered and unbuffered modules in the same channel, which prevents the system from posting.

特長

  • ECC protection guards data integrity with registered DDR4 architecture
  • 2133 MHz speed and CL15 latency deliver responsive server performance
  • 2 V operation matches DDR4 standard voltage for efficient power use
  • 8 GB capacity in a single 288-pin RDIMM module simplifies upgrades
  • Tested compatibility with HP part numbers including 726718, 752368, 774170, 780672, 784671, 790109, 803028, 807816

仕様

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What does the 2133 MHz rating mean when the module is installed in a server?

The module runs at 2133 MHz, delivering a peak transfer rate of 17000 MB/s per channel when the platform supports DDR4-2133.

How does the registered DIMM interface affect usable speed and capacity?

The registered buffer adds one clock cycle of latency but lets the memory controller drive more modules per channel without signal degradation.

What physical slot and keying does this 288-pin DDR4 RDIMM require?

It fits a standard DDR4 288-pin DIMM socket with the DDR4 key notch; the registered design does not change the mechanical outline.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。