OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
8 GB DDR4 desktop memory module running at 2400 MHz with CL17 latency and 1.2 V operation
This is an 8 GB DDR4 2400 CL17 1.20 V desktop DIMM built with major-brand chips. It follows the PC4-19200 standard and runs at the tested 2400 frequency with 288 pins. The unbuffered non-ECC design targets standard desktop platforms that accept DDR4 memory.
The module fits AMD and Intel desktop systems that support DDR4 2400 non-ECC UDIMMs. Builders needing ECC, registered, or lower-voltage SO-DIMM memory should choose a different part. Always confirm the motherboard specification before ordering.
The 288-pin DIMM seats in a standard desktop DDR4 slot with a single notch alignment. Common issues arise when the slot is not fully open, when the module is forced the wrong way, or when the board requires a BIOS update to recognise the new capacity.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by desktop motherboards.
When mixed with slower DDR4 modules, the system will run all memory at the lowest common speed and loosest timings.
Check the memory tab in CPU-Z or the BIOS memory information screen; both will report the active frequency and CAS latency.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?