EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8GB DDR4 2400 ECC RDIMM with CL17 latency and 1.2V operation for server upgrades
This 8GB DDR4 module runs at 2400MHz with CL17 latency and 1.20V operation. It is built as a registered DIMM with ECC for data integrity in server and workstation environments. The 2Rx8 organisation uses major-brand chips on a 288-pin PCB.
The registered buffer and ECC circuitry are the deciding factors for compatibility. Only systems that explicitly support DDR4 RDIMM ECC memory will accept this module; standard desktop boards that require unbuffered non-ECC DIMMs will not work.
Installation follows the standard 288-pin DIMM procedure: align the notch, press firmly until the retention clips engage, and confirm the module seats evenly. The most common issue is purchasing RDIMM ECC memory for a platform that only supports unbuffered non-ECC DIMMs.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module will run at DDR4 2400 MHz, delivering PC4-19200 bandwidth as long as the platform supports that data rate.
Registered ECC RDIMM adds a register between the DRAM and the memory controller, enabling error correction and supporting higher capacities per channel on compatible server boards.
It fits a standard DDR4 DIMM socket with 288 pins; the 2Rx8 organization does not change the mechanical keying.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?