暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 1Rx8 CL17 1.2V KSM24ES8/8ME server RAM

SKU CH-5053-P23H5

8GB DDR4 2400 ECC UDIMM with CL17 latency and 1.2V operation for server reliability

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds memory headroom for demanding workloads
  • DDR4 2400 speed delivers 19200 MB/s peak bandwidth
  • ECC UDIMM protects data integrity in server environments
  • CL17 latency at 1.2V balances responsiveness with efficiency
  • 288-pin DIMM form factor fits standard server memory slots

Target System & Purpose

This 8GB DDR4 ECC UDIMM is built for servers and workstations that require error-correcting memory. It suits administrators upgrading compatible platforms where data integrity matters more than raw speed. The module is not for desktop boards that lack ECC support or for builds needing registered DIMMs.

Thermals, Noise & Power

Operating at the standard DDR4 voltage of 1.20V, the module draws minimal power and produces negligible heat under normal workloads. As a passive component with no moving parts, it adds no audible noise to the chassis. The low voltage helps keep overall system thermals manageable.

Build Integration

The 288-pin DIMM fits standard DDR4 UDIMM slots and presents a single-rank 1Rx8 organisation with CL17 latency at 2400MHz. It frees a memory channel for additional capacity while delivering ECC protection. Verify your platform accepts unbuffered ECC DDR4 before installation.

特長

  • 8GB capacity adds memory headroom for demanding workloads
  • DDR4 2400 speed delivers 19200 MB/s peak bandwidth
  • ECC UDIMM protects data integrity in server environments
  • CL17 latency at 1.2V balances responsiveness with efficiency
  • 288-pin DIMM form factor fits standard server memory slots

仕様

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

How do I install this 288-pin DDR4 UDIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click shut, and verify the system recognises the full 8 GB at 2400 MHz in BIOS.

What maintenance or replacement will this ECC UDIMM need over time?

No scheduled maintenance is required; the module is tested for lifetime reliability and should only be replaced if a memory diagnostic reports uncorrectable errors.

What limit appears first when this 1.2 V CL17 module runs under sustained load?

The CAS latency of 17 cycles at 2400 MHz sets the timing boundary before thermal or voltage limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。