OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
8GB DDR4 2400MHz desktop memory module with CL17 latency and 1.20V operation for AMD and Intel systems
This single 8GB DDR4 module runs at 2400MHz with a CL17 latency and operates at the standard 1.20V. It is built as an unbuffered, non-ECC DIMM using major brand chips for broad AMD and Intel platform compatibility.
The 288-pin form factor slots directly into standard desktop motherboards without extra cables or brackets. Unbuffered design keeps latency low for typical workloads while the 1.20V rating matches default DDR4 voltage, so no manual BIOS tuning is required for basic operation.
This module serves as a direct equivalent for Crucial part numbers CT8G4DFD824A, CT2K8G4DFD824A and CT4K8G4DFD824A. The upgrade is worthwhile when a system has free DIMM slots and the motherboard supports DDR4 2400MHz operation, adding capacity for heavier multitasking.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
The module runs at 2400 MT/s, which is the PC4-19200 data rate, and the system will clock it to that speed if the motherboard supports it.
It fits a standard desktop DDR4 DIMM slot with 288 pins; the module is a single 8GB stick.
Power off the PC, open the case, align the notch on the 288-pin DIMM with the slot key, press firmly until the retention clips click, then verify the new 8GB appears in BIOS.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?