暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold contacts along the bottom edge

A-Tech

A-Tech 8GB DDR4 2400MHz ECC UDIMM 1Rx8 Server RAM

SKU CH-4XMR-2ED1R

8GB DDR4 2400MHz ECC UDIMM module with CL17 latency and 1.2V operation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with error correction
  • 2400 MHz DDR4 speed enables responsive server workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard server memory slots
  • Tested compatibility replaces Dell A9652462, A9654881, SNPMT9MYC/8G, MT9MY

8GB DDR4 2400MHz ECC UDIMM

This 8GB DDR4 module runs at 2400MHz with CL17 latency and 1.20V operation. It is an unbuffered ECC UDIMM built with a 1Rx8 rank configuration using major brand chips. The 288-pin DIMM targets server and workstation systems that require error-correcting memory.

ECC unbuffered DDR4 compatibility

The single specification that decides fit is the ECC unbuffered DDR4 2400MHz UDIMM format. Your motherboard must accept unbuffered ECC modules at this speed and voltage; registered or non-ECC DIMMs are not interchangeable with this part.

Suits servers needing ECC UDIMM upgrades

It suits administrators upgrading Dell systems referencing part numbers A9652462, A9654881, SNPMT9MYC/8G or MT9MY. Builders whose platforms require registered RDIMMs, non-ECC memory, or speeds other than DDR4 2400MHz should look at a different module.

特長

  • ECC protection guards data integrity with error correction
  • 2400 MHz DDR4 speed enables responsive server workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard server memory slots
  • Tested compatibility replaces Dell A9652462, A9654881, SNPMT9MYC/8G, MT9MY

仕様

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What does the 2400MHz rating mean once the module is installed in a server?

The module runs at 2400 MT/s, delivering a peak bandwidth of PC4-19200 on any DDR4 platform that supports this speed.

How does the DDR4 UDIMM interface limit performance in practice?

As an unbuffered ECC DIMM, it connects directly to the memory controller without a register, so the 2400 MT/s data rate and CL17 latency are the practical limits.

What physical slot and clearance does this 288-pin DIMM need?

It fits a standard DDR4 288-pin UDIMM slot and uses the 1.2V DDR4 voltage, so no extra power connectors or special cooling are required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。