暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech Supermicro Certified 16GB DDR4 2666MHz 2Rx8 ECC RDIMM 288-Pin Server Memory

SKU CH-Q3TB-1BD9V

16 GB DDR4 2666 MHz ECC registered server memory module, 288-pin dual-rank RDIMM with Micron chips, Supermicro certified for reliable operation

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • Micron chipset ensures dependable DDR4 2666MHz operation
  • ECC registered design corrects errors for data integrity
  • 16GB dual-rank capacity handles heavier workloads
  • 20V standard voltage keeps power draw efficient

Supermicro Certified 16GB DDR4 RDIMM

This 16GB DDR4 2666MHz registered DIMM carries Supermicro certification and uses Micron chips. It is built for servers and workstations that require ECC error correction and registered signalling for stable operation under continuous load. The module runs at standard 1.20V with CL19 latency.

Registered ECC limits for DDR4 2666

Registered DIMMs add a buffer that reduces electrical load on the memory controller, allowing higher capacities per channel than unbuffered modules. ECC detects and corrects single-bit errors but cannot fix multi-bit failures. The DDR4 2666 standard caps the data rate at 2666 MT/s, so bandwidth is fixed by the specification.

Verify RDIMM support and slot layout

Confirm that your motherboard accepts DDR4 RDIMM modules and supports ECC Registered operation; some consumer boards only take unbuffered non-ECC memory. Check the qualified vendor list for the MEM-DR416L-CL03-ER26 part number and ensure enough 288-pin slots are free for the desired capacity.

特長

  • Supermicro certified for guaranteed server compatibility
  • Micron chipset ensures dependable DDR4 2666MHz operation
  • ECC registered design corrects errors for data integrity
  • 16GB dual-rank capacity handles heavier workloads
  • 20V standard voltage keeps power draw efficient

仕様

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL03-ER26
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL03-ER26 (MTA18ASF2G72PDZ-2G6D1)

この商品に関する質問

Should I pick the 16GB 2666MHz module or a different capacity for my Supermicro server?

This module provides 16GB at DDR4 2666MHz with CL19 latency. Choose it when your board lists PC4-21300 RDIMM support and you need a single 16GB stick.

What does the 2666MHz rating deliver once the DIMM is installed in a live server?

It runs at 2666MT/s with CL19 timing at 1.2V, giving 16GB of ECC registered bandwidth per slot.

Is the 288-pin RDIMM interface limited to a specific DDR4 speed ceiling in practice?

The 288-pin RDIMM form factor carries DDR4 2666 (PC4-21300) signals; the module itself is rated for 2666MT/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。