暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A 20cm ultra-slim 1.25mm pitch 6-pin cable with clicky connectors

Adafruit

Adafruit 1.25mm Pitch 6-pin Cable 20cm 1:1

SKU CH-XRS2-EB6QN

A 20cm ultra-slim 1.25mm pitch cable with a clicky friction lock and 1:1 symmetric wiring for compact prototyping connections

  • TypePrototyping Products
  • Ultra-slim 1.25mm pitch fits where 0.1" headers cannot
  • Clicky friction lock gives secure connections without bulk
  • 1:1 symmetric wiring matches pin order on both ends
  • 20cm length keeps wiring tidy for compact builds
  • Six-pin layout supports multi-signal prototyping needs

Ultra-slim 1.25mm pitch prototyping cable

This 20cm cable uses a 1.25mm pitch connector for projects where 0.1 inch spacing is too large. The 1:1 symmetric wiring connects each pin directly to its counterpart on the opposite end. It suits developers and hobbyists building compact electronic prototypes.

Clicky friction-lock connectors for secure mating

The connectors feature a friction lock that gives a tactile click when fully seated, reducing accidental disconnection during testing. Ultra-slim construction keeps the cable light and flexible for tight board layouts. Six conductors carry signals across the 20cm length without crossover.

Verify pin count and pitch match your header

Confirm that your target header uses a 1.25mm pitch and exactly six positions before ordering. The 1:1 wiring order means pin one maps to pin one, so check that your schematic expects straight-through connections. Cable length is fixed at 20cm including both connector bodies.

特長

  • Ultra-slim 1.25mm pitch fits where 0.1" headers cannot
  • Clicky friction lock gives secure connections without bulk
  • 1:1 symmetric wiring matches pin order on both ends
  • 20cm length keeps wiring tidy for compact builds
  • Six-pin layout supports multi-signal prototyping needs

仕様

TypePrototyping Products

この商品に関する質問

What devices fit the 1.25mm pitch connector on this cable?

The 1.25mm pitch suits boards where 0.1in headers are too large and JST PH connectors are too bulky, giving a light, compact link.

How much space does the 20cm length need for routing?

The cable measures about 20cm end-to-end including both connectors, so allow that much clear path between the two mating sockets.

Does the 1:1 symmetric wiring need a specific orientation when plugging in?

Pin 1 on one end connects straight to pin 1 on the other, so either connector can go to either device without crossing wires.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。