Adafruit
Adafruit ADS1015 12-Bit ADC 4-Channel PGA Breakout
A 12-bit ADC offering 3300 samples per second over I2C with a programmable gain amplifier up to 16x and four selectable addresses
- TypeEngineering Development Tools
- 12-bit precision at 3300 samples per second over I2C
- Breakout board includes ferrites for quiet AVDD and AGND
- Configurable as 4 single-ended or 2 differential input channels
- Up to 4 devices on one I2C bus for 16 single-ended inputs
- Programmable gain amplifier up to 16x boosts small signals
12-Bit 4-Channel ADC Breakout
The Adafruit ADS1015 is a 12-bit analog-to-digital converter with four input channels and a programmable gain amplifier. It communicates over I2C at up to 3300 samples per second. The breakout board includes ferrites for quiet power rails. It operates from 2 V to 5 V logic levels.
Engineers and makers needing extra ADC channels
This board suits microcontrollers that lack a built-in ADC or projects requiring higher resolution than on-chip converters. It is not for applications needing more than 12-bit resolution or sample rates above 3300 per second. Buyers who need more than sixteen total channels should look elsewhere.
Four selectable I2C addresses for multi-board
The address pins allow up to four ADS1015 devices on one two-wire bus, giving sixteen single-ended inputs. This addressing scheme is the key specification that determines whether the board fits a given I2C layout.
特長
- 12-bit precision at 3300 samples per second over I2C
- Breakout board includes ferrites for quiet AVDD and AGND
- Configurable as 4 single-ended or 2 differential input channels
- Up to 4 devices on one I2C bus for 16 single-ended inputs
- Programmable gain amplifier up to 16x boosts small signals
仕様
| Type | Engineering Development Tools |
|---|
この商品に関する質問
How many samples per second can the ADS1015 sustain over I2C before the rate limits further measurements?
The converter provides 12-bit precision at 3300 samples per second over I2C, so sustained sampling is capped at that rate.
What thermal or audible output should I expect when the breakout runs continuously from a 2 V to 5 V supply?
The board draws very little current and has no active cooling, so it runs silently with negligible heat rise during all-day operation.
Which microcontroller pins and voltage level must I already have available to communicate with this ADC?
You need an I2C bus with two wires (SDA and SCL) and logic compatible with 2 V to 5 V to match the ADS1015 supply range.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Adafruit Audio FX Sound Board WAV/OGG Trigger 16MB Flash 11 Triggers
- Engineering Develop…
Adafruit Trellis Monochrome Driver PCB for 4x4 Keypad & 3mm LEDs engineering development tool
- Prototyping Products



