暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Chrome G1/4 compression fitting for 13mm hard tube with knurled body

Alphacool

Alphacool G1/4 13mm HardTube Compression Fitting Chrome 62776

SKU CH-NHWK-HECVJ

Connects 13mm hard tubing to a standard G1/4 thread with a knurled chrome compression fitting

  • TypeFittings

Color Chrome

  • Secure leak-free connection with absolute tightness promise
  • Fits 13mm outer diameter hard metal or plexi tubes
  • Standard G1/4 thread connects to common water-cooling parts
  • Knurled chrome finish allows tool-free hand tightening
  • Single fitting supplied for custom loop expansion

G1/4 13mm HardTube Fitting

The Alphacool G1/4 13mm HardTube Compression Fitting Chrome 62776 connects rigid tubing to standard water-cooling components. It accepts hard metal or plexi tubes with a 13mm outer diameter and seals against a G1/4 thread port. The knurled body allows hand-tightening without tools. One fitting is included per package.

Custom-loop builders using 13mm rigid tubing

This fitting suits builders assembling a custom loop with 13mm hard tubes and G1/4 threaded blocks, radiators or reservoirs. It does not suit systems that use soft tubing, smaller or larger rigid tubing, or non-G1/4 port threads.

13mm outer-diameter tube compatibility

The single specification that decides fit is the 13mm tube outer diameter. Only hard metal or plexi tubes measuring exactly 13mm OD will seal correctly in this compression fitting.

特長

  • Secure leak-free connection with absolute tightness promise
  • Fits 13mm outer diameter hard metal or plexi tubes
  • Standard G1/4 thread connects to common water-cooling parts
  • Knurled chrome finish allows tool-free hand tightening
  • Single fitting supplied for custom loop expansion

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What tube outer diameter must I already have for this 13mm fitting to seal correctly?

The fitting is designed for hard tubes with a 13mm outer diameter, whether they are metal or plexi, so your existing tubing must match that size exactly.

Will the G1/4 thread on this fitting mate with the water blocks and radiators I am keeping from my current loop?

Yes, the opposite end uses the standard G1/4 thread found on most water-cooling components, so it will connect directly to your existing blocks, radiators and reservoirs.

How can I verify the chrome knurled fitting is seated properly after I tighten it onto the tube?

When fully tightened the knurled collar sits flush against the fitting body with no visible gap, and a pressure test of the loop shows zero coolant seepage at the joint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。