暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Single deep black knurled compression fitting for 13mm hard tube with G1/4 thread

Alphacool

Alphacool G1/4 13mm HardTube Compression Fitting Deep Black 17189

SKU CH-XVCX-KJK8W

Connects 13mm hard tubes to G1/4 threads with a knurled compression design in deep black

  • TypeFittings

Color Black

  • Secure leak-free loop with precision G1/4 compression seal
  • Fits 13mm hard metal or plexi tubes for rigid builds
  • Knurled grip enables tool-free tightening by hand
  • Deep black finish matches stealth colour schemes
  • Standard G1/4 thread connects to any compatible block or radiator

G1/4 13 mm Hard-Tube Fitting

This compression fitting connects 13 mm outer-diameter rigid tubing to any component with a standard G1/4 thread. The knurled body allows hand tightening without tools. It suits custom loops built with hard acrylic, PETG or metal tubes. Buyers needing push-in quick-disconnects or barb fittings for soft tubing cannot use this part.

Sustained Loop Integrity

The compression design clamps the tube wall evenly around its full circumference, maintaining seal pressure through thermal expansion cycles. Deep black finish resists coolant staining during long-term operation. No flow-restriction data is supplied, so system builders must verify loop pressure drop independently.

Installation Notes

Slide the compression nut and olive onto the tube, seat the tube fully against the internal stop, then tighten the nut until the olive compresses. Over-tightening can crack acrylic or PETG; under-tightening leaves a leak path. No tube-cutting guide or deburring tool is included.

特長

  • Secure leak-free loop with precision G1/4 compression seal
  • Fits 13mm hard metal or plexi tubes for rigid builds
  • Knurled grip enables tool-free tightening by hand
  • Deep black finish matches stealth colour schemes
  • Standard G1/4 thread connects to any compatible block or radiator

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the G1/4 thread on the 17189 fitting leak after the loop runs hot all day?

The compression design seals hard 13 mm tubes to a standard G1/4 port and is built for continuous operation without weeping.

What tube size and block ports must I already have to use the 17189 fitting?

You need 13 mm OD rigid tubing and components with G1/4 threads such as radiators, blocks or reservoirs.

Will the 17189 fitting thread into the G1/4 ports on my older CPU block and radiator?

Yes — the G1/4 thread is the long-standing standard, so it mates with legacy blocks and radiators that use the same pitch.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。