暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six chrome knurled compression fittings for 13mm hard tube G1/4 thread

Alphacool

Alphacool HT 13mm HardTube Compression Fitting G1/4 Chrome 6-Pack

SKU CH-7T2K-XGZNA

Six chrome compression fittings connect 13 mm hard tubes to G1/4 threads with dual O-ring seals

  • TypeFittings
  • Leak-tight seal with dual O-ring design
  • Fits 13mm outer-diameter hard tubes
  • G1/4 thread connects to standard water-cooling parts
  • Knurled union nut allows tool-free hand tightening
  • Chrome finish resists corrosion and matches loop aesthetics

Alphacool HT 13mm HardTube Fittings

The Alphacool HT compression fittings provide secure G1/4 connections for 13mm outer-diameter hard tubes. Each chrome-plated fitting uses dual O-rings and a protective plastic disc to ensure a reliable seal. The knurled union nuts allow straightforward hand-tightening, while an 8mm Allen key secures the base. This six-pack supplies enough fittings for a typical custom loop build.

Builders using 13mm rigid tubing

These fittings suit builders assembling custom water-cooling loops with 13mm plexi or brass tubes who need a chrome finish. They are not intended for soft tubing, push-fit installations, or metric thread standards other than G1/4. Buyers requiring angled or rotary adapters, different tube diameters, or a black finish should select alternative models.

Verify tube diameter and thread compatibility

Confirm that your hard tubes measure exactly 13mm outer diameter and that all components in your loop use G1/4 threads. Check available clearance around each port to accommodate the fitting body and union nut. Ensure you have an 8mm Allen key for final tightening of the fitting base during assembly.

特長

  • Leak-tight seal with dual O-ring design
  • Fits 13mm outer-diameter hard tubes
  • G1/4 thread connects to standard water-cooling parts
  • Knurled union nut allows tool-free hand tightening
  • Chrome finish resists corrosion and matches loop aesthetics

仕様

TypeFittings

この商品に関する質問

What tube diameter do I need to use with these 13 mm compression fittings?

They are designed for hard tubes with a 13 mm outer diameter, whether plexi or brass.

Will the G1/4 threads on these fittings match the ports on my existing water blocks and radiators?

Yes, the G1/4 thread is the standard size used on almost all custom-loop components.

How can I confirm each fitting is sealed properly after I tighten the union nut with an 8 mm Allen key?

Pressurise the loop and watch for drips; the dual O-rings and protected seating should give a completely dry joint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。