暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue silicone bending insert for 13mm hard tubing, 150cm length

Alphacool

Alphacool Silicon Bending Insert 13mm 150cm Blue

SKU CH-FG2S-Y6DVS

Silicone insert prevents kinking when heat-bending 13 mm hard tubing, 150 cm length

  • TypeTubing
  • ColorBlue
  • FeaturesFor perfect bends in the Alphacool HardTubes now there is th
  • Heat-resistant silicone prevents kinking when bending 13mm hard tubing
  • 150cm length suits long tubing runs and complex loops
  • Insert slides inside tube for internal support during heating
  • Removes easily after cooling for clean finished bends
  • Compatible with Alphacool HardTubes in 10mm 12mm and 13mm inner diameters

Silicone Insert for 13mm Hard Tubing

This Alphacool silicone insert is designed for bending 13mm inner-diameter hard tubing in custom water-cooling loops. The heat-resistant silicone prevents kinking at the curved point while the tube is heated. After the bend cools the insert can be removed easily. It suits builders shaping longer HardTube runs.

Installation and Common Issues

Slide the 150cm insert fully inside the hard tube before applying heat to the bend area. The silicone withstands the temperature required for forming so the tube keeps a smooth radius. A frequent mistake is heating a section that is not supported by the insert which can cause the wall to collapse. Ensure the insert covers the entire curve.

Who This Suits and Who Should Look Elsewhere

The 150cm length suits builders forming curves in longer pipe sections. Shorter 30cm or 100cm versions exist for tight bends in short pipes. Buyers working with 10mm or 12mm inner-diameter tubing need the matching diameter insert. This product is only the bending aid not the hard tubing itself.

特長

  • Heat-resistant silicone prevents kinking when bending 13mm hard tubing
  • 150cm length suits long tubing runs and complex loops
  • Insert slides inside tube for internal support during heating
  • Removes easily after cooling for clean finished bends
  • Compatible with Alphacool HardTubes in 10mm 12mm and 13mm inner diameters

仕様

BrandAlphacool
Model1015255
TypeTubing
ColorBlue
FeaturesFor perfect bends in the Alphacool HardTubes now there is the perfect solution.

この商品に関する質問

How can I confirm the silicone insert is correctly positioned inside the 13mm hard tube before heating?

Push the 150cm blue silicone insert fully into the Alphacool HardTube until it reaches the bend zone; the tube should feel evenly supported along the heated section with no gaps.

What comes in the package and what must I supply myself?

The box contains one 150cm blue silicone bending insert (model 1015255); you must provide 13mm (1/2") ID Alphacool HardTubes and a heat source such as a heat gun.

Which insert length matches a long-radius bend in a full-loop build?

Choose the 150cm length for curves in longer pipes; the 30cm and 100cm versions are meant for shorter tubing runs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。