暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact metal enclosure for 12V to 3kV DC-DC conversion

Analog Technologies, Inc.

Analog Technologies, Inc. AHV12V3KV5MAW Industrial Power Supply 12V 0-3kV 5mA

SKU CH-F9AM-EV01K

A 12 V input DC-DC module delivering adjustable 0–3 kV at up to 5 mA for industrial high-voltage applications

  • TypeLinear Power Supplies
  • Voltage500V
  • Amps10mA
  • 12 V input powers 0–3 kV output for high-voltage applications
  • 5 mA maximum current supports precision instruments
  • 400 mA to 1.8 A input range fits varied supplies
  • Metal enclosure gives zero EMI and effective heat sinking
  • 5 V ± 0.05 V reference ensures stable control voltage

Engineered for industrial reliability

This DC-DC high-voltage power supply module converts a 12 V input into a precisely regulated 0 to 3 kV output with a maximum current of 5 mA. It is built for engineers and technicians who need stable, low-noise power in demanding environments such as X-ray systems, spectral analysis, semiconductor manufacturing, and particle accelerator research. The metal enclosure provides effective heat sinking and zero EMI emissions, ensuring clean operation around sensitive instrumentation.

Thermals, noise and power draw

The unit accepts an input voltage of 12 V ± 1 V and draws between 400 mA and 1.8 A depending on load, while delivering a reference voltage of 5 V ± 0.05 V for control circuitry. Its linear topology and metal housing dissipate heat without forced airflow, eliminating acoustic noise and electromagnetic interference that could disrupt analytical measurements or imaging processes. Electronic shutdown control allows immediate output inhibition for system protection.

Integration and system fit

A 0 to 5 V control voltage scales the output linearly, enabling straightforward integration into automated test rigs or closed-loop control systems. Standardised connectors and a compact footprint simplify installation inside existing enclosures, freeing valuable rack space for other subsystems. The module is not suited for applications requiring higher output current, adjustable polarity, or AC mains input without additional front-end conversion.

特長

  • 12 V input powers 0–3 kV output for high-voltage applications
  • 5 mA maximum current supports precision instruments
  • 400 mA to 1.8 A input range fits varied supplies
  • Metal enclosure gives zero EMI and effective heat sinking
  • 5 V ± 0.05 V reference ensures stable control voltage

仕様

TypeLinear Power Supplies
Voltage500V
Amps10mA

この商品に関する質問

How do I install the AHV12V3KV5MAW and what is the common mistake?

Connect a 12 V source capable of 400 mA to 1.8 A to the input terminals, then apply a 0–5 V control signal to the CTRL pin; the frequent error is using an input supply that cannot sustain the required current range.

What maintenance or replacement will this supply need later?

The metal enclosure provides zero EMI and acts as a heat sink; keep ventilation paths clear and verify the reference voltage remains within 5 V ± 0.05 V during periodic checks.

What limit appears first during sustained high-voltage operation?

The output current is capped at 5 mA, so any load demanding more will hit that ceiling before thermal or voltage regulation limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。