暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Aokin US01-1 14-piece 3D printer nozzle cleaning kit with ten 0.4mm needles, two tweezers, and a brass brush

Aokin US01-1 14 Pcs 3D Printer Nozzle Cleaning Kit

SKU CH-BBAB-C7MVK

14-piece kit clears 0.4 mm nozzles with ten stainless-steel needles, two precision tweezers and a brass brush for hot-end and bed maintenance

  • Color14 Pcs
  • TypeUS01-1
  • Clears 0.4 mm nozzles with 10 stainless-steel needles
  • Two precision tweezers reach feeder gears and tight spots
  • Brass brush with 30×50 wires scrubs nozzles and heated beds
  • Stainless-steel needles bend without breaking for repeated use
  • Anti-static, non-magnetic tweezers give secure grip on hot parts

14-Piece Nozzle Cleaning Kit

This 14-piece kit supplies the essential tools for clearing 0.4 mm 3D printer nozzles and maintaining hot-end components. It contains ten 0.4 mm stainless-steel needles, one straight and one angled stainless-steel tweezer, and a brass-wire brush with a plastic handle. All items arrive new and ready for workshop use.

Suits owners of 0.4 mm extruders

The kit matches the 0.4 mm nozzle diameter found on many popular printers including Creality Ender 3, CR-10, Prusa i3, Anet A8, E3D MK8 and MK10 hot-ends. Makers who need to clean heated beds, feeder gears, throat tubes or remove stubborn support material will find the brush and tweezers helpful. Users with nozzles smaller or larger than 0.4 mm cannot use the supplied needles.

0.4 mm needle diameter decides fit

Each of the ten needles measures 0.4 mm in diameter, 3 cm shank length and 7 cm total length, designed specifically for 0.4 mm nozzle bores. The straight tweezer is 14 cm long, the angled tweezer 12 cm long, and the brass brush has a 17 cm overall length with a 4 cm by 1.2 cm head containing 30 holes of 50 brass wires each. Heat the nozzle above 200 degrees before using any tool.

特長

  • Clears 0.4 mm nozzles with 10 stainless-steel needles
  • Two precision tweezers reach feeder gears and tight spots
  • Brass brush with 30×50 wires scrubs nozzles and heated beds
  • Stainless-steel needles bend without breaking for repeated use
  • Anti-static, non-magnetic tweezers give secure grip on hot parts

仕様

BrandAokin
ModelUS01-1
Part NumberUS01-1
Color14 Pcs
TypeUS01-1

この商品に関する質問

Will the 0.4 mm needles fit the nozzle on my Creality Ender 3?

The kit is listed as compatible with 0.4 mm nozzles on printers including the Ender 3, CR-10 and Prusa i3.

Can I use the brass brush on a cold glass bed without scratching it?

The brass wire brush is intended for the nozzle and heated bed; brass is softer than steel but can still mark glass if used aggressively.

How do I confirm the needles are clearing a clog once the hot-end reaches temperature?

Heat the nozzle above 200 °C, insert a 0.4 mm needle and feel for reduced resistance as filament extrudes cleanly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。