Aokin US01-1 14 Pcs 3D Printer Nozzle Cleaning Kit
14-piece kit clears 0.4 mm nozzles with ten stainless-steel needles, two precision tweezers and a brass brush for hot-end and bed maintenance
- Color14 Pcs
- TypeUS01-1
- Clears 0.4 mm nozzles with 10 stainless-steel needles
- Two precision tweezers reach feeder gears and tight spots
- Brass brush with 30×50 wires scrubs nozzles and heated beds
- Stainless-steel needles bend without breaking for repeated use
- Anti-static, non-magnetic tweezers give secure grip on hot parts
14-Piece Nozzle Cleaning Kit
This 14-piece kit supplies the essential tools for clearing 0.4 mm 3D printer nozzles and maintaining hot-end components. It contains ten 0.4 mm stainless-steel needles, one straight and one angled stainless-steel tweezer, and a brass-wire brush with a plastic handle. All items arrive new and ready for workshop use.
Suits owners of 0.4 mm extruders
The kit matches the 0.4 mm nozzle diameter found on many popular printers including Creality Ender 3, CR-10, Prusa i3, Anet A8, E3D MK8 and MK10 hot-ends. Makers who need to clean heated beds, feeder gears, throat tubes or remove stubborn support material will find the brush and tweezers helpful. Users with nozzles smaller or larger than 0.4 mm cannot use the supplied needles.
0.4 mm needle diameter decides fit
Each of the ten needles measures 0.4 mm in diameter, 3 cm shank length and 7 cm total length, designed specifically for 0.4 mm nozzle bores. The straight tweezer is 14 cm long, the angled tweezer 12 cm long, and the brass brush has a 17 cm overall length with a 4 cm by 1.2 cm head containing 30 holes of 50 brass wires each. Heat the nozzle above 200 degrees before using any tool.
주요 특징
- Clears 0.4 mm nozzles with 10 stainless-steel needles
- Two precision tweezers reach feeder gears and tight spots
- Brass brush with 30×50 wires scrubs nozzles and heated beds
- Stainless-steel needles bend without breaking for repeated use
- Anti-static, non-magnetic tweezers give secure grip on hot parts
사양
| Brand | Aokin |
|---|---|
| Model | US01-1 |
| Part Number | US01-1 |
| Color | 14 Pcs |
| Type | US01-1 |
이 상품에 대한 질문
Will the 0.4 mm needles fit the nozzle on my Creality Ender 3?
The kit is listed as compatible with 0.4 mm nozzles on printers including the Ender 3, CR-10 and Prusa i3.
Can I use the brass brush on a cold glass bed without scratching it?
The brass wire brush is intended for the nozzle and heated bed; brass is softer than steel but can still mark glass if used aggressively.
How do I confirm the needles are clearing a clog once the hot-end reaches temperature?
Heat the nozzle above 200 °C, insert a 0.4 mm needle and feel for reduced resistance as filament extrudes cleanly.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
