ASRock RX9070GRE SLD 12GO graphics card
- PCI Express 5.0 x16
- AMD
ASRock
Radeon RX 9070 GPU with 16 GB GDDR6, 256-bit bus, 2520 MHz boost clock, triple-fan cooler, PCIe 5.0 x16, one HDMI 2.1b and three DisplayPort 2.1a outputs
Option Challenger
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
Edition RX 9070
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
The ASRock Challenger RX9070 CL 16G is a PCI Express 5.0 x16 graphics card built on AMD RDNA 4 architecture. It carries 16 GB of GDDR6 memory across a 256-bit bus running at 20 Gbps. The board targets 1440p and 4K gaming with a game clock of 2070 MHz and a boost clock up to 2520 MHz. Four display outputs include one HDMI 2.1b and three DisplayPort 2.1a connectors.
The card draws up to 220 W under load and is fed by two 8-pin power connectors. A 700 W power supply is recommended to maintain stable voltage during extended sessions. With 3584 stream processors clocked at the game frequency the GPU delivers consistent throughput for long rendering or gaming workloads. DirectX 12 Ultimate and OpenGL 4.6 support keep modern APIs fully available.
Three axial fans move air through a full-length heatsink that spans the 290 mm board length. The 51 mm thick ATX form factor fits standard mid-tower cases while keeping GPU temperatures in check during typical gaming loads. Idle fan-stop behaviour reduces noise when the system is at the desktop. Maximum digital resolution reaches 7680 x 4320 for multi-monitor or VR setups.
| Brand | ASRock |
|---|---|
| Series | Challenger |
| Model | RX9070 CL 16G |
| Part Number | RX9070 CL 16G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 |
| Architecture | RDNA 4 |
| Game Clock | 2070 MHz |
| Boost Clock | Up to 2520 MHz |
| Stream Processors | 3584 |
| Effective Memory Clock | 20000 MHz (20 Gbps) |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1b |
| DisplayPort | 3 x DisplayPort 2.1a |
| Color | Black |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 220W |
| Recommended PSU Wattage | 700W |
| Power Connector | 2 x 8-Pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 290 mm |
| Card Dimensions (L x H) | 290 x 123 x 51 mm |
| Package Contents | - 1x Quick Installation Guide |
| 配送重量 | 1.36 kg |
| 梱包サイズ | 394 × 216 × 97 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The card uses a triple-fan design rated for a 220 W thermal design power; actual noise and temperature depend on case airflow and fan-curve settings.
The board requires two 8-pin PCIe power connectors and a 700 W supply is recommended; a single cable is not sufficient.
The interface is backward compatible; it will operate at PCIe 4.0 x16 speeds in a 4.0 slot with negligible gaming impact.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?