暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular ATX power supply with ROG branding, fully modular cable sockets, single 135mm fan, matte finish, 160mm length

ASUS

ASUS ROG-STRIX-1000G 1000W power supply

SKU CH-DS8B-BRKCW MPN ROG-STRIX-1000G

A 1000 W ATX12V unit with 80 Plus Gold efficiency, fully modular cables, a 135 mm dual ball bearing fan and 0dB mode for silent low-load operation

  • TypeATX12V
  • Maximum Power1000 W
  • Fans1 x 135mm Dual Ball Bearing Fan
  • Main Connector20+4Pin
  • +12V RailsSingle
  • PCI-Express Connector6 x 6+2-Pin

Options ATX 80+ Gold (1000W)

Edition Black

  • 1000 W output powers high-end builds
  • 80 PLUS Gold efficiency cuts waste heat
  • 135 mm dual ball-bearing fan runs quieter for longer
  • Fully modular cables keep the interior tidy
  • ROG heatsinks lower component temps for extended life

Power and Form Factor

This ASUS ROG Strix unit is a 1000 W ATX12V power supply built for high-end desktop builds. It uses a fully modular cable design and a single +12 V rail rated at 83 A. The chassis measures 160 mm in length and fits standard ATX mounting points.

Who This Suits and Who It Doesn't

Builders running multi-GPU configurations or heavily overclocked CPUs will appreciate the six PCIe 6+2-pin connectors and 80 PLUS Gold efficiency. Systems that only need a single graphics card or have tight case clearance under 160 mm should consider a smaller, lower-wattage unit instead.

Deciding Specification: 1000 W Output

The 1000 W maximum power rating is the single figure that determines whether this unit matches your hardware. If your total system draw under load stays well below this level, a lower-capacity supply will cost less and run more efficiently.

特長

  • 1000 W output powers high-end builds
  • 80 PLUS Gold efficiency cuts waste heat
  • 135 mm dual ball-bearing fan runs quieter for longer
  • Fully modular cables keep the interior tidy
  • ROG heatsinks lower component temps for extended life

仕様

BrandASUS
SeriesROG Strix Series
ModelROG-STRIX-1000G
TypeATX12V
Maximum Power1000 W
Fans1 x 135mm Dual Ball Bearing Fan
Main Connector20+4Pin
+12V RailsSingle
PCI-Express Connector6 x 6+2-Pin
SATA Power Connector8
Max PSU Length160 mm
ModularFull Modular
Energy-Efficient80 PLUS GOLD Certified
ProtectionOPP / OVP / UVP / SCP / OCP / OTP
Input Voltage100 - 240 V
Output+3.3V@25A, +5V@25A, +12V@83A, [email protected] , +5VSB@3A
Connectors1 x MB 24/20-pin
2 x CPU 4+4-pin
6 x PCI-E 6+2-pin
8 x SATA
6 x Peripheral
FeaturesROG heatsinks cover critical components. Lower temps result in a longer lifespan and reduced noise.
Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure.
Dual ball fan bearings can last up to twice as long as sleeve bearing designs.
0dB Technology lets you enjoy light gaming in relative silence.
An 80 Plus Gold Certification is the result of Japanese capacitors and other premium components.
Cosmetic customization is enabled by a magnetic logo and stickers that help you reskin the visible side to your l
Dimensions3.39" x 5.91" x 6.30"
Weight4.16 lbs.
Package Content1 x Power Cord
1 x Motherboard Power Cable
2 x CPU Cable 1000mm
3 x PCI-E Cable
2 x SATA Cable
2 x Peripheral
2 x ROG badge
1 x ROG logo magnet
3 x ROG label
*MB/ CPU/ PCI-E cables come with embedded capacitors in the middle.
配送重量3.54 kg
梱包サイズ310 × 180 × 114 mm

このモデルの他のバージョン

同シリーズにさらに 4点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 160 mm length and ATX12V form factor fit my case?

The unit is 160 mm long and follows the ATX12V standard, so it fits any case that accepts a regular ATX power supply up to that depth.

Which cables must stay plugged in during installation, and which can I leave out?

Only the 24-pin motherboard cable and the two 4+4-pin CPU cables are fixed; the six PCIe 6+2-pin, eight SATA and six peripheral cables are fully modular and can be omitted.

How often should I clean the 135 mm dual ball bearing fan to keep 0dB mode working?

Blow dust out of the fan intake every six to twelve months; the dual ball bearings are rated for long life and do not need lubrication.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。