暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

ASUS

ASUS ROG STRIX Z370-I GAMING Intel motherboard

SKU CH-7XWT-MCSGA

Mini-ITX board for LGA 1151 CPUs with Intel Z370 chipset supporting 32GB DDR4 memory

  • CPU Socket TypeLGA 1151
  • ChipsetIntel Z370
  • Maximum Memory Supported32GB
  • LGA 1151 socket accepts compatible Intel processors
  • Intel Z370 chipset enables CPU overclocking features
  • DDR4 memory support up to 32 GB capacity
  • Mini-ITX form factor fits compact chassis builds
  • Includes SATA cable for drive connectivity

Compact Intel Z370 platform

This Mini-ITX motherboard uses the Intel Z370 chipset and an LGA 1151 socket to support compatible processors. It provides four DDR4 slots with a maximum memory capacity of 32GB. The small form factor suits builds where space is limited.

Upgrade from larger Z370 boards

Moving to this board makes sense when a Mini-ITX chassis replaces a standard ATX case and the builder wants to keep the Z370 feature set. The change is worthwhile only if the reduced expansion slots and rear I/O count match the new build plan.

Verify CPU and cooler clearance

Confirm the processor is an LGA 1151 model supported by the Z370 chipset before ordering. Check that the chosen CPU cooler fits the Mini-ITX layout and that the power supply provides the required EPS connector. The package includes the motherboard, one SATA cable and the rear I/O shield only.

特長

  • LGA 1151 socket accepts compatible Intel processors
  • Intel Z370 chipset enables CPU overclocking features
  • DDR4 memory support up to 32 GB capacity
  • Mini-ITX form factor fits compact chassis builds
  • Includes SATA cable for drive connectivity

仕様

BrandASUS
ModelASUS ROG STRIX Z370-I GAMING
CPU Socket TypeLGA 1151
ChipsetIntel Z370
Maximum Memory Supported32GB

この商品に関する質問

Will the Mini-ITX form factor fit my case and leave room for the LGA 1151 cooler mounting holes?

The board uses the Mini-ITX layout, so it mounts in any case with Mini-ITX standoffs; the LGA 1151 socket follows Intel standard hole spacing for compatible coolers.

What is the correct order for seating the CPU, DDR4 memory and the I/O shield during assembly?

Install the I/O shield first, then lower the LGA 1151 processor into the socket, lock the lever, and finally press the DDR4 modules into the two slots until they click.

How often should the onboard metal battery be checked or swapped to keep BIOS settings intact?

The included metal battery typically lasts several years; replace it when the system loses time or BIOS settings after power-off.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。