OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Athena Power
An 800 W Flex ATX unit with 80 PLUS Platinum efficiency, 150 mm length for 1U or mini-ITX builds, single 12 V rail at 64 A and 12V-2×6 cable for ATX 3.1 GPUs
The Athena Power AP-MFATX80P868 is an 800W Flex ATX power supply built for 1U rackmounts, mini-ITX and other small-form-factor servers. It delivers up to 64A on the 12V rail and carries 80PLUS Platinum certification for high efficiency across loads. The unit accepts 90–264V input at 47–63Hz and meets UL 62368-1 safety standards. It is intended for integrators and operators who need dense, reliable power in compact enclosures.
A native 12V-2X6 connector is included, enabling direct connection to ATX 3.1 and PCIe 5.0 graphics cards without adapters. The supply complies with Flex ATX-12V and EPS-12V specifications and provides a 20+4 pin main connector plus standard peripheral outputs. Active PFC and full-range input simplify deployment across regions. No modular cables or software utilities are mentioned in the data.
At 150mm long, 81.5mm wide and 40.5mm high the unit slides into 1U and SFF cases where standard ATX units cannot. A single 12V DC exhaust fan with thermal speed control handles cooling; the 250000-hour MTBF rating reflects testing at 25°C under full load. Installers should verify that the fixed cable lengths reach their backplane or GPU routing paths. Remote on/off control is available for managed environments.
| Brand | Athena Power |
|---|---|
| Series | Flex ATX 62368 |
| Model | AP-MFATX80P868 |
| Type | EPS12V |
| Single/Redundant | Single |
| Maximum Power | 800W |
| Fans | Single Fan |
| Main Connector | 20+4Pin |
| Output Current | +3.3V@18A, +5V@18A,12V@64A, [email protected] , [email protected] |
| Output | +3.3V, +5V,12V, -12V, +5Vsb |
| Input Voltage | 90 - 264 V |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 8.8A@110V, 4.0A@ 240V |
| MTBF | 250,000 Hours on Maximum Load at +25 degree C |
| Efficiency | > 90% |
| Hold-up Time | 11 ms Minimum at Nominal Input Voltage |
| Protection | OCP, OVP, |
| Features | Rise time: Less than 70 ms |
| Dimensions | (L x W x H) 150 x 81.50 x 40.5 mm/ 6 x 3.2 x 1.59 in |
| Weight | 4.25 lbs |
| Humidity | 20%-90% |
| Temperature | Operating: 0°C ~ +55°C on Full Load; Storage & Shipping: -40°C ~ +70°C |
The unit has a mean time between failures of 250000 hours at full load and 25 degrees Celsius, so the fan should last many years of continuous use.
Over-current protection on the 12V output activates at 64A, limiting sustained draw before voltage drops or thermal limits are reached.
A thermal speed controller adjusts the 12V DC exhaust fan to match load, keeping noise proportional to the power being delivered.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?