NEMIX RAM 64GB (8x8GB) DDR4 3200 CL22 ECC RDIMM memory upgrade
- 64GB (8 x 8GB)
- DDR4 3200 (PC4 2560…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Athena Power
An 800 W Flex ATX unit with 80 PLUS Platinum efficiency, 150 mm length for 1U or mini-ITX builds, single 12 V rail at 64 A and 12V-2×6 cable for ATX 3.1 GPUs
The Athena Power AP-MFATX80P868 is an 800W Flex ATX power supply built for 1U rackmounts, mini-ITX and other small-form-factor servers. It delivers up to 64A on the 12V rail and carries 80PLUS Platinum certification for high efficiency across loads. The unit accepts 90–264V input at 47–63Hz and meets UL 62368-1 safety standards. It is intended for integrators and operators who need dense, reliable power in compact enclosures.
A native 12V-2X6 connector is included, enabling direct connection to ATX 3.1 and PCIe 5.0 graphics cards without adapters. The supply complies with Flex ATX-12V and EPS-12V specifications and provides a 20+4 pin main connector plus standard peripheral outputs. Active PFC and full-range input simplify deployment across regions. No modular cables or software utilities are mentioned in the data.
At 150mm long, 81.5mm wide and 40.5mm high the unit slides into 1U and SFF cases where standard ATX units cannot. A single 12V DC exhaust fan with thermal speed control handles cooling; the 250000-hour MTBF rating reflects testing at 25°C under full load. Installers should verify that the fixed cable lengths reach their backplane or GPU routing paths. Remote on/off control is available for managed environments.
| Brand | Athena Power |
|---|---|
| Series | Flex ATX 62368 |
| Model | AP-MFATX80P868 |
| Type | EPS12V |
| Single/Redundant | Single |
| Maximum Power | 800W |
| Fans | Single Fan |
| Main Connector | 20+4Pin |
| Output Current | +3.3V@18A, +5V@18A,12V@64A, [email protected] , [email protected] |
| Output | +3.3V, +5V,12V, -12V, +5Vsb |
| Input Voltage | 90 - 264 V |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 8.8A@110V, 4.0A@ 240V |
| MTBF | 250,000 Hours on Maximum Load at +25 degree C |
| Efficiency | > 90% |
| Hold-up Time | 11 ms Minimum at Nominal Input Voltage |
| Protection | OCP, OVP, |
| Features | Rise time: Less than 70 ms |
| Dimensions | (L x W x H) 150 x 81.50 x 40.5 mm/ 6 x 3.2 x 1.59 in |
| Weight | 4.25 lbs |
| Humidity | 20%-90% |
| Temperature | Operating: 0°C ~ +55°C on Full Load; Storage & Shipping: -40°C ~ +70°C |
The unit has a mean time between failures of 250000 hours at full load and 25 degrees Celsius, so the fan should last many years of continuous use.
Over-current protection on the 12V output activates at 64A, limiting sustained draw before voltage drops or thermal limits are reached.
A thermal speed controller adjusts the 12V DC exhaust fan to match load, keeping noise proportional to the power being delivered.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?