AZZA
AZZA PSAZ-850G ATX 3.0 850 W power supply
An ATX 3.0 compatible, fully modular 850 W power supply with 80 PLUS Gold efficiency, a 120 mm fan, 12VHPWR connector and a 160 mm depth
- TypeATX / ATX 3.0 Compatible
- Maximum Power850 W
- Fans120 mm
- PFCActive
- Main Connector20+4Pin
- PCI-Express Connector4 x 6+2-Pin
Options ATX 3.0 80+ Gold (850W) Black
- ATX 80+ Gold (850W)
- ATX 3.0 80+ Gold (850W) Black
- Ready for modern GPUs with native 12VHPWR 5.0 connector
- Clean builds enabled by full modular cabling
- Lower running costs from 80 PLUS Gold 90% efficiency
- Comprehensive protection suite guards components
- Long service life rated at 100,000 hours MTBF
850 W ATX 3.0 power supply
This AZZA unit delivers 850 W of continuous power and meets the ATX 3.0 specification. It carries 80 PLUS Gold certification for 90 percent efficiency at typical load. The fully modular design lets builders connect only the cables their system needs.
Sustained-load behaviour
Active PFC and a full suite of protections — UVP, OVP, OPP, OCP, SCP and OTP — keep output stable during long sessions. Hold-up time exceeds 16 ms and the power-good signal settles within 100 to 500 ms. A 120 mm fan manages thermals while the unit is rated for more than 100,000 hours MTBF.
Installation and common issues
The 160 mm depth fits most standard ATX cases, but builders should verify clearance before ordering. Four 6+2-pin PCIe cables plus a native 12VHPWR 12+4 connector support modern graphics cards. Nine SATA and four peripheral connectors cover storage and accessories. Missing the EPS cable or mixing modular leads from other units are the typical mistakes.
特長
- Ready for modern GPUs with native 12VHPWR 5.0 connector
- Clean builds enabled by full modular cabling
- Lower running costs from 80 PLUS Gold 90% efficiency
- Comprehensive protection suite guards components
- Long service life rated at 100,000 hours MTBF
仕様
| Brand | AZZA |
|---|---|
| Model | PSAZ-850G ATX 3.0 |
| Type | ATX / ATX 3.0 Compatible |
| Maximum Power | 850 W |
| Fans | 120 mm |
| PFC | Active |
| Main Connector | 20+4Pin |
| PCI-Express Connector | 4 x 6+2-Pin |
| SATA Power Connector | 9 |
| Max PSU Length | 160 mm |
| Modular | Full Modular |
| Power Good Signal | 100-500ms |
| Hold-up Time | > 16ms |
| Efficiency | 90% at Typical load |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Protection | UVP / OVP / OPP / OCP / SCP / OTP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A |
| MTBF | >100,000 Hours |
| Connectors | 1 x 12VHPWR (12+4) PCIe / 1 x 24 pin (20+4) ATX / 2 x 8 pin (4+4) EPS (CPU) / 4 x 4 pin Peripheral / 4 x 8 pin (6+2) PCIe / 9 x SATA |
| Cable Spec | 1 x ATX/MB cable (x1 20+4 PIN) 2 x CPU/EPS cable (4+4 PIN) 3 x PCI-e cable (4x 6+2 PIN) 3 x SATA cable (9x SATA) 1 x Molex cable (4x Molex) 1 x PCI-e 5.0 (1x12+4 Pin) |
| Dimensions | 3.39" x 5.91" x 6.30" |
このモデルの他のバージョン
同シリーズにさらに 1点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
この商品に関する質問
How loud does the 120 mm fan get when the 850 W unit runs at typical load all day?
The 80 PLUS GOLD rating means 90 % efficiency at typical load, so less waste heat and lower fan speeds during extended use.
Which cables must I already have to connect the 20+4 pin main and 12VHPWR 12+4 pin GPU connectors?
All required cables — 24-pin ATX, two 4+4-pin EPS, four 6+2-pin PCIe, one 12VHPWR, nine SATA and four Molex — are included in the full-modular set.
Will the 160 mm depth and ATX 3.0 spec fit my older case and motherboard that only have 20+4 pin and 6+2 pin sockets?
Yes, the 160 mm length matches standard ATX bays, and the 20+4 pin main plus 6+2 pin PCIe cables are backward compatible with legacy boards and GPUs.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。




