暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Set of 60 stainless steel cleaning needles in four sizes with blue-capped storage tube

Bambwise Nc-kit-10 60PCS Nozzle Cleaning Kit 0.2 0.3 0.4 0.5mm

SKU CH-3K2Q-84S77

Set of 60 hardened-steel cleaning needles in 0.2, 0.3, 0.4 and 0.5 mm diameters with protective tube for most 3D printer nozzles

  • TypeNc-kit-10
  • Complete kit with 60 stainless-steel needles in four diameters for thorough nozzle cleaning
  • Four needle sizes — 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm — match common nozzle diameters to prevent damage
  • Protective tube with secure blue cap keeps all 60 needles organised and safe between uses
  • Compatible with popular printers such as Ender 3, Ender 3 V2, Ender 5, K1, CR-10, MK8 and V6
  • Hardened-steel construction resists wear for reliable, long-lasting maintenance performance

Complete 60-Piece Needle Kit

This Bambwise Nc-kit-10 set provides 60 stainless steel cleaning needles in four diameters: 0.2mm, 0.3mm, 0.4mm, and 0.5mm. The kit includes 12 pieces of the 0.2mm size, 18 pieces each of the 0.3mm and 0.4mm sizes, and 12 pieces of the 0.5mm size. A protective storage tube with a secure blue cap keeps the needles organized and safe between uses.

For FDM Printer Maintenance

The kit suits owners of FDM printers who need to clear blocked nozzles on machines such as Ender 3, Ender 3 V2, Ender 5, K1, CR-10, MK8, and V6 hotends. The hardened steel construction withstands repeated heating cycles for reliable clearing of residual filament. Users who require specialised tools for resin printer maintenance or non-standard nozzle diameters not covered by the four included sizes should look at alternative solutions.

Simple Heated-Clearance Process

Installation consists of heating the nozzle to the correct temperature for the loaded filament, typically 180 to 200 Celsius for PLA or 200 to 220 Celsius for ABS, then inserting the matching needle to dislodge debris. The main risk is burns from the hot nozzle, so careful handling is essential. Selecting a needle larger than the nozzle bore can damage the orifice, so always match the needle diameter to the nozzle size.

特長

  • Complete kit with 60 stainless-steel needles in four diameters for thorough nozzle cleaning
  • Four needle sizes — 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm — match common nozzle diameters to prevent damage
  • Protective tube with secure blue cap keeps all 60 needles organised and safe between uses
  • Compatible with popular printers such as Ender 3, Ender 3 V2, Ender 5, K1, CR-10, MK8 and V6
  • Hardened-steel construction resists wear for reliable, long-lasting maintenance performance

仕様

BrandBambwise
ModelNc-kit-10
Part NumberNc-kit-10
TypeNc-kit-10

この商品に関する質問

Which 3D printer nozzle diameters can the 0.2mm, 0.3mm, 0.4mm and 0.5mm needles in this kit clean?

The kit includes 12 needles each of 0.2mm and 0.5mm, plus 18 needles each of 0.3mm and 0.4mm, matching common nozzle sizes on printers such as Ender 3, Ender 3 V2, Ender 5, K1, CR-10, MK8 and V6.

What temperature must the nozzle reach before I insert a needle from this kit?

Heat the nozzle to 180–200°C for PLA or 200–220°C for ABS before using any of the stainless steel needles, and handle carefully to avoid burns.

How can I confirm the needles are clearing the nozzle properly after heating?

When the correct-size needle passes through the heated nozzle with little resistance and filament extrudes cleanly afterwards, the blockage is cleared.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。