暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Mid-tower E-ATX case, aluminium frame, tempered glass side panel, front USB Type-C port

BFKK

BFKK E-ATX Mid Tower Case ARGB 360mm USB 3.1 Gen-2 Type-C Tempered Glass

SKU CH-TMSY-S622Y

E-ATX mid-tower chassis with front-panel 360 mm water-cooling support, tempered-glass side panel, USB 3.1 Gen-2 Type-C and dual USB 3.0 ports, room for 375 mm graphics cards and 170 mm CPU coolers.

  • TypeE-ATX Mid Tower Chassis
  • Supports E-ATX boards for high-end builds
  • Front USB 3.1 Gen-2 Type-C for fast peripherals
  • Built-in ARGB controller with dedicated light key
  • Fits 360 mm radiators top and front for liquid cooling
  • Tool-free dust filters simplify cleaning and maintenance

E-ATX Mid-Tower Chassis

This mid-tower case accepts Mini-ITX, Micro-ATX, ATX, CEB and E-ATX motherboards. It features an aluminium draw-process exterior with a 4 mm tempered-glass left side panel. A built-in ARGB controller works with a motherboard 5 V ARGB header and dedicated lighting keys on the I/O panel.

Builders needing broad motherboard support

The case suits builders who want E-ATX compatibility, room for a 375 mm graphics card and a 170 mm CPU cooler, plus front-panel USB 3.1 Gen-2 Type-C and dual USB 3.0 ports. It is not for systems requiring more than two 3.5-inch drives or more than four 2.5-inch drives, nor for radiators thicker than 55 mm at the front.

Check motherboard form factor.

Verify that your motherboard is Mini-ITX, Micro-ATX, ATX, CEB or E-ATX. Confirm the graphics card is no longer than 375 mm and the CPU cooler no taller than 170 mm. Ensure the power supply fits within 180 mm depth and that front radiator thickness stays at or below 55 mm.

特長

  • Supports E-ATX boards for high-end builds
  • Front USB 3.1 Gen-2 Type-C for fast peripherals
  • Built-in ARGB controller with dedicated light key
  • Fits 360 mm radiators top and front for liquid cooling
  • Tool-free dust filters simplify cleaning and maintenance

仕様

TypeE-ATX Mid Tower Chassis

この商品に関する質問

What motherboard form factors does the E-ATX mid tower support?

The chassis accepts Mini-ITX, Micro-ATX, ATX, CEB and E-ATX boards, so you can use any of those sizes without modification.

Will a 360 mm radiator fit in the front if I keep my existing 3.5-inch hard drives?

Yes, the front panel supports a 360 mm radiator while the two 3.5-inch bays remain available; the 3.5-inch slots can also be converted to 2.5-inch SSD mounts if needed.

How can I confirm the ARGB lighting is working after I connect the 5 V header?

Press the dedicated light-control key on the I/O panel; the built-in controller will cycle the ARGB LEDs, showing the system is receiving the 5 V signal correctly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。