暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two silver compression fittings for 16mm rigid tubing

Bitspower

Bitspower BPTA-TFHA16-GS G1/4" 16mm OD rigid tube fitting 2-pack Glorious Silver

SKU CH-HB2Y-A2ZE8 MPN BPTA-TFHA16-GS

Two G1/4" compression fittings secure 16 mm OD rigid tubing in a Glorious Silver finish

  • TypeFittings
  • Compression design secures 16mm OD rigid tubing
  • G1/4" thread fits standard water-cooling components
  • Glorious Silver finish matches premium loop aesthetics
  • Two fittings per pack cover a basic run
  • RoHS compliant materials meet environmental standards

G1/4" compression fittings for 16mm OD rigid tubing

These Bitspower Touchaqua Advanced fittings connect 16mm outer-diameter hard tubing to any component with a G1/4" thread. The compression design secures the tube without adhesives and the Glorious Silver finish matches silver-themed loops. Each pack contains two fittings.

For custom-loop builders using 16mm rigid tubing

Suits builders assembling a custom water-cooling loop with 16mm OD hard tubes and standard G1/4" ports. Not for systems using soft tubing, smaller or larger rigid tubing diameters, or non-G1/4" thread standards.

G1/4" thread with 5mm thread length

The fitting carries a G1/4" thread that is 5mm long, which determines whether it will seat properly in your blocks, radiators, reservoirs or pumps. Verify that your components accept a 5mm thread engagement before purchase.

特長

  • Compression design secures 16mm OD rigid tubing
  • G1/4" thread fits standard water-cooling components
  • Glorious Silver finish matches premium loop aesthetics
  • Two fittings per pack cover a basic run
  • RoHS compliant materials meet environmental standards

仕様

TypeFittings

この商品に関する質問

Will the G1/4" threads on these 16mm OD compression fittings need periodic re-tightening or O-ring replacement?

The compression design seals against the rigid tube and the G1/4" port; no scheduled maintenance is required beyond a visual check for leaks after initial assembly.

What is the first limitation you hit when running a loop with these fittings continuously under load?

The 5 mm thread engagement depth and the compression-ring seal set the mechanical limit; exceeding the tubing or block pressure rating will fail before the fitting itself.

Do these silver compression fittings generate any audible noise or measurable heat during all-day operation?

The fittings are passive metal components with no moving parts; they add no noise and negligible thermal resistance to the loop.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。